Looking to buy a fast streetcar.
#1
Staging Lane
Thread Starter
iTrader: (6)
Join Date: Aug 2004
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Looking to buy a fast streetcar.
Looking to buy a fast streetcar.I live in Indiana and am hoping to find something as close to home as possible.Car has to be at least a proven 10 second car with an auto.Don't want a stick car.
Thanks
Thanks
Last edited by elevensecondv6; 05-23-2010 at 01:48 AM.
#3
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Long Island,NY
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
Here ya go.
Well guys I was looking to trade the car for a stock 01 or 02 WS6 M6, but that didnt pan out, so I need to sell the car. My wife and I are seperating and I need this car gone. She has the truck and I can no longer use my trailer and therefore my car. The motor, tranny and rear all have 200 or so miles on them since they were assembled at Eastside Performance in Nov.
Here is my sig. It has all the details. The car was done top shelf from day one.
Car- Black 99 FireHawk TA #547,
Darton Wet Sleeve Alum Blk LS1 434 CI
Callies forged 4" LS1 stroker crank.
Absolute Speed LS6 S3 Heads
Comp 248/252 .612 112,
Crane dual Springs,
Kooks Coated 1 7/8 th Headers w/ORY & Corsa Cat back,
TH400 3300stall,
85mm TSP Lid,
Eastside Perf. Oil pump,
Katech timing chain,
Fast 90mm intake and Fast 90mm TB ,
Pace 90mm MAF,
Hal "R" series front shocks & springs Hal 12 way in rear with stock springs
DoubleDiamond SFC welded
BMR Tubular K member
LCA'S,
Torque Arm for TH400
Hotchkiss Adj. PHR,
Strange 12 bolt w/373,
ASP Underdrive pulley,
Wolfe 6 pt weld in Chromoly cage,
KVR's,
Mecham Performance "Titan" Bird on Hood,
Hurst linelock
Car is good for mid 10's in this shape. It is a full weight car. If u wanna do some weight reduction like removing seats or whatnot, it will go low 10s. I had the motor built for juice also. It will hold a 200 shot just fine. I wanted to spray into the nines if possible. The car is on Long Island NY. I am looking for a stock 01' or 02' M6 if possible still to trade, but I cant find one. Then the whole divorce mess is fuckingh things up bigtime. Lemme know. Bear
I am asking $24k but depending on where you are or what you have WE CAN TALK. Let me know. Thanks, Bear
Well guys I was looking to trade the car for a stock 01 or 02 WS6 M6, but that didnt pan out, so I need to sell the car. My wife and I are seperating and I need this car gone. She has the truck and I can no longer use my trailer and therefore my car. The motor, tranny and rear all have 200 or so miles on them since they were assembled at Eastside Performance in Nov.
Here is my sig. It has all the details. The car was done top shelf from day one.
Car- Black 99 FireHawk TA #547,
Darton Wet Sleeve Alum Blk LS1 434 CI
Callies forged 4" LS1 stroker crank.
Absolute Speed LS6 S3 Heads
Comp 248/252 .612 112,
Crane dual Springs,
Kooks Coated 1 7/8 th Headers w/ORY & Corsa Cat back,
TH400 3300stall,
85mm TSP Lid,
Eastside Perf. Oil pump,
Katech timing chain,
Fast 90mm intake and Fast 90mm TB ,
Pace 90mm MAF,
Hal "R" series front shocks & springs Hal 12 way in rear with stock springs
DoubleDiamond SFC welded
BMR Tubular K member
LCA'S,
Torque Arm for TH400
Hotchkiss Adj. PHR,
Strange 12 bolt w/373,
ASP Underdrive pulley,
Wolfe 6 pt weld in Chromoly cage,
KVR's,
Mecham Performance "Titan" Bird on Hood,
Hurst linelock
Car is good for mid 10's in this shape. It is a full weight car. If u wanna do some weight reduction like removing seats or whatnot, it will go low 10s. I had the motor built for juice also. It will hold a 200 shot just fine. I wanted to spray into the nines if possible. The car is on Long Island NY. I am looking for a stock 01' or 02' M6 if possible still to trade, but I cant find one. Then the whole divorce mess is fuckingh things up bigtime. Lemme know. Bear
I am asking $24k but depending on where you are or what you have WE CAN TALK. Let me know. Thanks, Bear
Trending Topics
#9
On The Tree
iTrader: (2)
Originally Posted by elevensecondv6
SStolen and crazycamaro496:
Any track time's on your cars??
Thanks
Any track time's on your cars??
Thanks
a good friend has a 383 w/ a 150 in virtually the same car as mine (91 iroc). it made 446rwhp and 555rwtq with the spray on the same dyno, and he runs 10.70's consistently on slicks. the cars weigh about the same, within 40lbs despite the motor difference.
i haven't been in an n/a car that pulls as hard as this. the power numbers show that it's good for 10's and i think on a 150 it's easily into the 9's. i just posted the dyno sheet in my thread if you want to take a look..
#18
how about either of my cars for sale? 2000 Z28 or 2003 Cobra, both have run 10s? I'd be willing to deliver it and fly back for a little money.
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/328307-lost-job-must-sell.html
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/328307-lost-job-must-sell.html
#19
TECH Apprentice
Join Date: May 2005
Location: Cali & Nevada
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
i have a 1963 chevy nova that has a built motor in it brand new everything put lots of money into it im selling it for 9 lostoceanz63@aol.com