celeSS

will Rim Diameter (in) VL: 15.00 in.
Rim Width (in) VL: 8.00 in.
Backspacing (in) VL: 4.500 in.

will this fit on the front

ws6pewter

iTrader: (1)

I did not know the factory size for sure but thought that the 17 x 10 with the offest of 36 might be too much for the front. I'll probably try to get 17 x 9.5 with around a 48mm offset instead which should put the wheels about a .5" out farther and look better(definitely not going for the ricer look). Thanks I'll be sure to post when the care gets its new shoes. Thanks

Xsta Z 28

iTrader: (2)

They be fine.

Xsta Z 28

iTrader: (2)

Nope.

celeSS

WHat backspace is neccesary to fit the front on an 8 inch wide wheel?

Ace$nyper

iTrader: (8)

OK I just want to triple check before I click order! *still need to flip a coin on what rims *

17x9 ZR1 rims knock offs
17x9 SS rim knocks offs

I was thinking 275/40/R17 all around is there a tire that is 285 or 295 that fits on a 9" wide rim? Or should I just do 275 all around? I was thinking of running ZRIs again for daily from me enjoying mine before and trying to keep costs low.

Also if somthing I said is stupid feel free to warn me!

Xsta Z 28

iTrader: (2)

4.5" to 5" B.S. is OK, but what diameter?

celeSS

the rim is a 15x8
5.5 bs

Xsta Z 28

iTrader: (2)

ZR'1 and SS "knock offs" are the same wheel . . .

Most after market ZR'1 style wheels are 9.5" wide . . . 275/40ZR17 is the best recommended tire, but a 285 would fit.

Xsta Z 28

iTrader: (2)

Will NEVER fit over the brakes. A 3.5" wide x 15" dia. is about all that fits, and you STILL have to grind the caliper . . . .

Ace$nyper

iTrader: (8)

I wasn't aware of that where I saw them they were labeled separtley.

Thanks for the prompt reply going to get me some new shoes now

jhug

iTrader: (11)

Just to pe absolutely positive..

z06 replica wheels (18x9.5 with +56mm offset) with 275/35R18 's will fit like a charm? or will it need a spacer? if so where can i nab one and what size?

Xsta Z 28

iTrader: (2)

They will fit, and sit in the wheel wells very similarly to Stock wheels. Spacers are entirely up to you.

FineWine

iTrader: (1)

OK, I searched this thread and didn't find it so here goes:

17x9 American Racing Rebels on a Camaro. I believe the backspacing is 21mm, which is significantly less than the 35-45mm range listed here.

Will they fit with a fender roll? Will they fit lowered an inch or so?

Xsta Z 28

iTrader: (2)

No way will they fit. They will stick OUT of the wheel well.

Mike02Z

iTrader: (13)

Xsta,
I've read almost all 21 pages (probably 18+) and I'm sure I'm Ok but I wanted one more head-check before pulling the trigger. I have an 02 Z28 and I want to purchase a set of replica C6 Z06 Chrome wheels. the size I want to use on all 4 corners is 18 x 9.5. Offset is +50mm. I plan to use P275/35 18 tires all around. I figure there should be no modifications needed to my car. It is not lowered. Am I in good shape? Is the P275 the ideal width tire or is a P265 better?
Thanks!

Xsta Z 28

iTrader: (2)

The 18 x 9.5 with a 50 mm offset and 275/35ZR18 is PERFECT.

lomaximumta

iTrader: (5)

I got some new wheels

17 x 9.5 zr1 wheels for the front 56mm...I am going to use---275/40/17's

17 x 11 zr1 wheels for the rear 56mm...I dont know what size to go with. I want them to be bigger than the front for performance and the "cool stance" but I dont want to hammer or modify anything. I am having trouble understanding the size guide. can someone please guide me...285,295,305,315 etc. etc.

thanks alot and sorry if I sound dumb. I read the whole thread and did research..

Jay

lomaximumta

iTrader: (5)

btw the car is all stock suspension wise...just subframes and a strut tower brace.

thanks again.

lomaximumta

iTrader: (5)

correction the rear wheels are 50mm and the fronts are 56mm and they are all 5 x 4.75

thanks again