josh1107

im just looking for replacements for my 16 stock rims on my 98 z. i would like to go a bit wider on back, but not sure. currently have 245/50/zr16's.
ive been trying to search it, but everyone seems to run the bigger 17 and 18 rims

thanks
josh

Xsta Z 28

iTrader: (2)

255/50ZR16 work.

RyRy

iTrader: (6)

I just wanted to get your opinion on my new set up for my 02 Z28

I got some 18X9 HPR5's and was planning on going with the BF goodrich KDW 275/35/18. Found them at costco for $215 installed per tire. Let me know what you think...

Xsta Z 28

iTrader: (2)

Seems fine to me, especially for 18" tires. Now the bigger question, Can Costco install 18" tires?

RyRy

iTrader: (6)

yeah, I went in and asked them yesterday afternoon. The guy quoted me there $215 installed. Ive had good luck there in the past with other cars so hopefully they wont screw up this one.

ninetres

iTrader: (35)

God I hope it wasn't asked in this thread, but 20+ pages was too much.....

Will the c6 z06 replica wheels I just bought for my camaro fit on a corvette? All four are 19x9.5 w/ 275/35/18.

Just wondering, I'm having a really hard time deciding if I should keep them, or sell them and get the regular c6 wheels.

blackbird345

will 28X10X16 drag slicks fit a stock TransAm?

Xsta Z 28

iTrader: (2)

Depends all on the offsets . . .

Xsta Z 28

iTrader: (2)

Sorry I have no idea, I deal only in street tire setups.

celeSS

i want to put weld draglites 15X10 in the FRONT AND BACK. Is 10inches to big for the front, since the stock wheel is 9.5 i think they might be okay. i want to run bfg et radials 275/50/15 in the front and bfg 295/50/15 in the rear with a 7.5 backspace. lowered 1.6 in front, stock in rear. what do you think?

Xsta Z 28

iTrader: (2)

No way a 15" x 10" wheel is EVER going to fit up front. I don't understand why you'd want 15" wheels and street sized tires. . . .

350 HRSS

TTII's 17x9.5 I know a 275/40/17 will work for front.

I was wanting to put the 17x11 TTII in the rear. Would I be safe w/ a
285/40/17 tire for that size rim?

The reason I say, is b/c I have 4 of these tires laying around w/o wheels on them, and I would love to have the 17x11's on the rear, but don't want to have to order new tires. So, will I be safe? Anyone have any pics of this size on their car?

Anyone else have to use a BFH or do any mods for this rim? Offset for the 17x11 is 45. The car is at stock ride height, and it has a moser 12 bolt if that makes any difference (95Z). I was hoping to be able to get away w/ the 285, to avoid and fender rolling mods.

???

Xsta Z 28

iTrader: (2)

A 285 on a 11" wheel will do for the time being, my look a little small for the wheel, but it will fit. With that sized tire there should be no need for any "mods"

URNZONEBAIT

sorry for asking so can I put the 20x10.5 in front and 20X11 in the back. 1st will they fit ? If so what size tire to get? oh yeh the motorsport Z06 wheels.

JCurtin

iTrader: (1)

hey, I have 18x9 evos 275-35-18s is that the only thing i can go with? I really want the widest available outback. Can anything smaller fit the front? Is it best I just go with matching on all 4?

ws6pewter

iTrader: (1)

Sorry i have seen this here before but i cannot find it when i search.

1. Stock width on 2002 WS6...9.5"
2. Stock offset on 2002 WS6...50mm?
3. Wheel shops all say that 17 x 10" width will not fit up front. people here say they will? I do not any rubbing. I've been looking at the smoothies 17 x 10 with 36mm offset...will these stick out too much and look odd? I want to keep same size on all corners.

Thanks

Xsta Z 28

iTrader: (2)

If they are the right offset virtually any wheel will fit . . .

Xsta Z 28

iTrader: (2)

With 4 wheels of the sames size it is best to go with 4 tires of the same size, gives you the most flexability.

And a 275/35ZR18 is the widest you can go on a 9" wheel . . .

Small up front, sure, a 245/40ZR18 should work fine, although might look a little narrower than the wheel.

Xsta Z 28

iTrader: (2)

1. Stock WS6 wheel width is 9".
2. Stock offset is 56 mm.
3. 10" wheels up front are pushing it. Although since you have a TA the fenders are a little wider than a Camaro. 36 mm IMHO will stick out up front. I have 38 mm offset 9.5" wheels up front, and they bearly fit under the fender lip. So adding more width, is going to stick out and a a smaller offset will make it stick out more.

allaboutfun

just a "double check and make sure question"... I'm looking to pick up some
TSW mondello's in an 18x9 +45 will these fit my 94' firebird with 275/35/ZR18 or any other recomended size.