nitr0racing21

iTrader: (5)

More then 350?

with tires or without

jsteele90

iTrader: (13)

well mine ran a 12.2 with only 339. full weight street car with drag radials on heavy *** chrome 17s out back and my heavy *** chrome 17s up front. so im sure with some lighweight rear wheels and skinnys up front it would have done 12.0 or 11.9 with a better 60 foot. 1.706

White Catfish

iTrader: (1)

Thats a pretty damn good time if thats just the mods in your sig for a full weight car???? No gears?

jsteele90

iTrader: (13)

373s but i dont think they do too much

JonCR96Z

iTrader: (33)

My dynoed 313/325 with lid and catback. I added a ported TB,an eletric waterpump and a stall and ran 11.85. On a dyno with the stall locked it would probably dyno around 330-340

MikeG

iTrader: (33)

Mine made 342/350 before I added a pulley and a cutout. Picked up 3 MPH at the track from those two mods. Hopefully I'll make another pull soon.

Edit: Just got new #s today. 354/366.

JonCR96Z

iTrader: (33)

You picked up 3 mph from a pulley and a cut out? You sure there wasn't some weather changes or something else involved.

If not then I might have to do that.

AChotrod

iTrader: (17)

I picked up 17/16 at the tires with a cut out alone dynoed back to back open and closed

nitr0racing21

iTrader: (5)

So will 344/346 (sae) be enough for 11's Ill have bilistiens(spelling) and some MT's

Possible some skinnies

JonCR96Z

iTrader: (33)

If you can cut some low 1.60 60's. Which is unlikely with a 6 speed and impossible on a stock stalled auto.

nitr0racing21

iTrader: (5)

dam I want 11's with M/T I need a quick way to get 11's

JonCR96Z

iTrader: (33)

nitrous

StreetSilverado

iTrader: (17)

Mine dyno'd 390Hp/37x? is what the past owner told me anyway. Its got a stock converter in right now, but i've got the 4000 on the way. I have no idea what kinda track numbers it should put down with the mods in my sig. I need to go put it back on the dyno sometime.

JonCR96Z

iTrader: (33)

If you can hook it it should be mid 11s.

StreetSilverado

iTrader: (17)

Thats about what I'm aiming for , thanks bro. Just need to get it to stick..

MATTREDSS

iTrader: (16)

316whp & 309tq corrected with 410s on mustang dyno with all mods in sig. Went 11.8s with 1.5s 60fts without ftra,ud pulley,slp maf,ft 85mm lid and base tune in my predator shifting at 5500rpm. Now I have those mods and shifting at 6100rpm, so I cant wait for track to reopen to run new times.

Matt

MikeG

iTrader: (33)

There were some slight weather changes I'm sure, but both nights were similar. No more than 1 MPH could have been due to the weather.

JonCR96Z

iTrader: (33)

No ET just MPH?

nitr0racing21

iTrader: (5)

only one person really answered the op

MikeG

iTrader: (33)

Well sure, a few tenths too, but this thread is about horsepower which is where you will get MPH increases from. I didn't think it was relevant info.