Neanderthal Carb Guy BS Thread
#181
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah, like they have at the Smithsonian. LOL I got my picture in Fastest Street Car magazine once. So, I had to have that one. I usually pick up the engine masters challenge edition when that comes out. Every once in a while I am amused in something in Car Craft. Digital edition of course :p
#182
10 Second Club
#188
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well the UMI adjustable lower control arm brackets and the lowering of the rear an inch were a success. I went to my local 1/8 track on a TNT night. There were a lot of street cars there and the track got pretty dirty, but my car hooked like a champ. Normally in those conditions I would have to roll into the launch and usually still spin. This Wednesday, I just matted it and it stayed hooked nicely all night. Very happy.
#194
Staging Lane
Join Date: Jan 2003
Location: Perth, Australia
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Paper Subscriptions:
Australian Shooter (Comes with my SSAA membership, similar to your NRA)
Motorsport (also has digital as part of the subscription)
Digital subscriptions:
HeliOps
Guns & Ammo
F1 Racing
Octane
Hotrod Magazine
Australian Shooter (Comes with my SSAA membership, similar to your NRA)
Motorsport (also has digital as part of the subscription)
Digital subscriptions:
HeliOps
Guns & Ammo
F1 Racing
Octane
Hotrod Magazine
#195
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
OK, no more excuses....will be working on the car to get it done this week.
Been huntin' (got another 8point)....and we had to have a family pet euthanized. (12 y.o. mini-Dachshund)
Been up and down around here a lot.
Enough procrastinating....I promise Eric
LOL
Been huntin' (got another 8point)....and we had to have a family pet euthanized. (12 y.o. mini-Dachshund)
Been up and down around here a lot.
Enough procrastinating....I promise Eric
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
Last edited by Doug G; 11-02-2014 at 05:14 PM.
#197
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I like it...playing by ear (little bit of a hike).
But to get thrown out at Capital wouldn't hurt my feelings.![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Gotta go....Ravens-Steelers game (Mid-Atlantic SuperBowl)![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Already 7 beers in
But to get thrown out at Capital wouldn't hurt my feelings.
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Gotta go....Ravens-Steelers game (Mid-Atlantic SuperBowl)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Already 7 beers in
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
#198
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
OK....
Converter in and bolted up
Trans in and bolted up
Dip stick ($#@$&*) in
Trans cross member in and bolted up
Speed-o cable back on
**************************************
Left to do.....
Went to put driveshaft back in....pinion seemed loose
Going to see if I can snug it up to take out the play.
Pick up all the tools
Sent her back down on all 4's
Start her up and add ATF to full level
Thennnnn
TEST TIME
Converter in and bolted up
Trans in and bolted up
Dip stick ($#@$&*) in
Trans cross member in and bolted up
Speed-o cable back on
**************************************
Left to do.....
Went to put driveshaft back in....pinion seemed loose
![MAD](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_mad.gif)
Pick up all the tools
Sent her back down on all 4's
Start her up and add ATF to full level
Thennnnn
![Icon Evil](https://ls1tech.com/forums/images/smilies2/icon_evil.gif)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#199
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
OK, drive shaft in, pinion tightened with a 2' cheater bar (only got maybe an eighth of a turn), vacuum line hooked up.
Still to do....
go over everything one more time
pick up tools
add ATF
test this bitch
Still to do....
go over everything one more time
pick up tools
add ATF
test this bitch
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)