Conversion folks please list your conversion in here
Teching In
Joined: Jun 2010
Posts: 4
Likes: 0
From: Mt. Dora,FL.
1989 S10 pickup.Was a 4cyl truck
2003 LS 5.3 from a truck w/4l60e
New stand-a-loan wiring harrness
Jegs duel exhaust kit
Custom made motor mounts(by me)
Custom made trans mount(by me)
This is progress as of now.
2003 LS 5.3 from a truck w/4l60e
New stand-a-loan wiring harrness
Jegs duel exhaust kit
Custom made motor mounts(by me)
Custom made trans mount(by me)
This is progress as of now.
Teching In
Joined: Jun 2009
Posts: 9
Likes: 0
From: groves, tx
2 LS conversions 1972 Pontiac Lemans Convertible
1999 LS1/4L60e
current performance wiring harness
edelbrock LS conversion headers
intake fuel pump
brp motor mounts and transmission mount
Currently running and driving
1972 C10 SWB
5.3/4L60e from 2001 Silverado
current performance wiring harness
doug thorley conversion headers
CPP motor and transmission mounts
Work in progress (hope to be driving by Christmas)
1999 LS1/4L60e
current performance wiring harness
edelbrock LS conversion headers
intake fuel pump
brp motor mounts and transmission mount
Currently running and driving
1972 C10 SWB
5.3/4L60e from 2001 Silverado
current performance wiring harness
doug thorley conversion headers
CPP motor and transmission mounts
Work in progress (hope to be driving by Christmas)
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Projekt Wrekt 1)1969 Camaro, was using a built 355 small block & th350 auto transmission that I put together when I was in college
2) 2001 Z28 6 speed donor car
Block was cracked, so I went on a scavenger hunt to find missing pieces. Came up with a custom LS1/T56 combo consisting of the following:
New wheels for good measure
http://www.youtube.com/watch?v=EwE29sOaGG0
2) 2001 Z28 6 speed donor car
Block was cracked, so I went on a scavenger hunt to find missing pieces. Came up with a custom LS1/T56 combo consisting of the following:
New wheels for good measure
http://www.youtube.com/watch?v=EwE29sOaGG0
Teching In
Joined: Nov 2010
Posts: 18
Likes: 0
From: Greenbrier, TN
1989 Iroc
Ls1/maybe t56
http://www.thirdgen.org/techboard/me...roc-owner.html
The swap is underway right now, as well as the interior from my WS6 donor car.
Ls1/maybe t56
http://www.thirdgen.org/techboard/me...roc-owner.html
The swap is underway right now, as well as the interior from my WS6 donor car.
LQ9 into my 1965 Skylark I am putting a carbureted LQ9 into my 1965 Skylark.
Here is my build thread:
https://ls1tech.com/forums/conversio...ld-thread.html
And, a few pics.
Here is my build thread:
https://ls1tech.com/forums/conversio...ld-thread.html
And, a few pics.
Registered User
Joined: Nov 2010
Posts: 2
Likes: 0
Hi everyone ! New here , lots of great projects and info ! We're imparting on several new projetcs but one very exciting one is our installation of LS motor in a small light Jet boat. as requests for this have grown increasingly over the past couple seasons One obstacle for us is the neccesity of a front mounting plate which would be similar to what we have seen here any thoughts ,suggestions or help would be greatly appreciated Thanks Tom @JBP
Registered User
Joined: Nov 2010
Posts: 2
Likes: 0
Land Cruiser 
Registered User
Joined: Nov 2010
Posts: 1
Likes: 0
82 camaro looking to replace the built 350 for a 6.0L i have out of a truck. i do however want to change the efi to a carb setup. im looking for any help ANYONE can provide. i read somewhere that changing to the L92 heads would be the way to go. i also have no clue how the oiling system works either.i also want to put my built th350 behind it. this is all really new to me. im doing this on a budget and could use as much help i can get get. thanks
Teching In
Joined: Nov 2010
Posts: 12
Likes: 0
91 240sx ls1 4l60e ms4 cam 7.4 hardened pushrods prc stage one heads 1 3/4 headers from daft b&m trans pak car is ugly and free now i have myself in a mess and still havent got it all put together yet but cant wait and should be a lot of fun with the 195 60 15 tires that come on it
Currently under the knife for turbo kit v.2