400 HP internally stock no Power adder?
#181
10 Second Club
iTrader: (11)
Join Date: Apr 2003
Location: Surf City, NC
Posts: 1,151
Likes: 0
Received 0 Likes
on
0 Posts
You guys should ask 02 WS6 TA from LS2.com how he performed his cars modifications or what he actually did. Considering he claims to put down 397rwhp and 384rwtq with a completely stock LS1 motor w/ stock manifolds, MTI lid, K&N air filter, Granatelli mass air, Mac Off road y-pipe, Corsa exhaust, and LS1 edit tuning done by himself!
#182
TECH Resident
Join Date: Dec 2003
Location: Land of rocks and boredom
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Revelation222
Mr. Spindoctor sir, you had better come back with a motherload of positive and reputable information concerning your product or you, your business, and your reputation will be up **** creek without a paddle.
Thank You and have a Nice Day.
Thank You and have a Nice Day.
Also, Packy, that guy that claims 397 rwhp with STOCK MANIFOLDS shouldnt even be discussed as its such BS its undescribable.
#184
TECH Fanatic
Join Date: Jul 2002
Location: San Antonio Texas
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Packy
You guys should ask 02 WS6 TA from LS2.com how he performed his cars modifications or what he actually did. Considering he claims to put down 397rwhp and 384rwtq with a completely stock LS1 motor w/ stock manifolds, MTI lid, K&N air filter, Granatelli mass air, Mac Off road y-pipe, Corsa exhaust, and LS1 edit tuning done by himself!
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
You just made my day!
#187
I doubt it as well. I have seen 390's on a Z06 with Kooks, Vararam, and a good exhaust. If you threw the whole kitchen sink at it (electric water pump, no belt, etc... ) you could go over 400 at the wheels, but that was a z06 as well to start with.
#188
TECH Fanatic
Join Date: Jul 2002
Location: San Antonio Texas
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PCMFORLESS
I doubt it as well. I have seen 390's on a Z06 with Kooks, Vararam, and a good exhaust. If you threw the whole kitchen sink at it (electric water pump, no belt, etc... ) you could go over 400 at the wheels, but that was a z06 as well to start with.
BUT its WAY easier for an 2002+ to get there than a 2001 model. The one you saw was probably an 01, but like you mentioned it still has a 400rwhp potential with bolt ons .
This puts me back to the topic of the thread.. how the heck is that guy running 400rwhp on an fbody with bolt ons? OKAY OKAY OKAY, ill give him a break on the HP figures.. DEAR GOD just explain the 400rwtq..
Last edited by 2002_TAWS6; 04-17-2004 at 11:07 PM.
#189
10 Second Club
iTrader: (11)
Join Date: Apr 2003
Location: Surf City, NC
Posts: 1,151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2002_TAWS6
Stock manifolds?
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
You just made my day!
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
You just made my day!
You should really go over to LS2.com and see the Panama City Gang sub-forum of the in the Florida section. He posts there quite frequently and will also speak of this bs there. However he has yet to ever produce a dyno sheet or any of his so called 11 second time slips that he has bragged on many times! The best we have ever observed has been 12.7 @109 with 2.0 sixty foot time! He also claims that he went 112mph that day on one pass but no one saw it!
#192
TECH Fanatic
Join Date: Jul 2002
Location: San Antonio Texas
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Packy
I'm glad! He makes my day everyday when he says that he is gonna bust my *** on his stock motor alone!
You should really go over to LS2.com and see the Panama City Gang sub-forum of the in the Florida section. He posts there quite frequently and will also speak of this bs there. However he has yet to ever produce a dyno sheet or any of his so called 11 second time slips that he has bragged on many times! The best we have ever observed has been 12.7 @109 with 2.0 sixty foot time! He also claims that he went 112mph that day on one pass but no one saw it!
You should really go over to LS2.com and see the Panama City Gang sub-forum of the in the Florida section. He posts there quite frequently and will also speak of this bs there. However he has yet to ever produce a dyno sheet or any of his so called 11 second time slips that he has bragged on many times! The best we have ever observed has been 12.7 @109 with 2.0 sixty foot time! He also claims that he went 112mph that day on one pass but no one saw it!
"12.7 @109 with 2.0 sixty foot time! He also claims that he went 112mph that day on one pass but no one saw it!"
Damn not only is this guy a clown but hes a creative one too! Why dont you ask him "What happened to the 112mph time-slip?" and right before he even tries to answer ask him "Did you lose it?" I bet he will say yes . Hahaha...
its funny how some people ask what you ran in the 1/4 mile, or what you dynoed and then just start inflating there numbers like they have bigger ***** or something.
#193
10 Second Club
iTrader: (11)
Join Date: Apr 2003
Location: Surf City, NC
Posts: 1,151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2002_TAWS6
Man i sure wish I could bump into those kinda people.. I love messing with clowns like this all the time.
"12.7 @109 with 2.0 sixty foot time! He also claims that he went 112mph that day on one pass but no one saw it!"
Damn not only is this guy a clown but hes a creative one too! Why dont you ask him "What happened to the 112mph time-slip?" and right before he even tries to answer ask him "Did you lose it?" I bet he will say yes . Hahaha...
its funny how some people ask what you ran in the 1/4 mile, or what you dynoed and then just start inflating there numbers like they have bigger ***** or something.
"12.7 @109 with 2.0 sixty foot time! He also claims that he went 112mph that day on one pass but no one saw it!"
Damn not only is this guy a clown but hes a creative one too! Why dont you ask him "What happened to the 112mph time-slip?" and right before he even tries to answer ask him "Did you lose it?" I bet he will say yes . Hahaha...
its funny how some people ask what you ran in the 1/4 mile, or what you dynoed and then just start inflating there numbers like they have bigger ***** or something.
#196
Wow! I lose my Internet connection for a couple days and I get crucified. I must be a glutton for punishment to jump back into this lions den of non-believers. I don't have much time as I have been unusually busy with the business lately. Lets see if I can wade through all the real B.S. and find the legitimate questions that deserve answers.
#197
Originally Posted by SilverTAWS6
Spindoctor, you might want to change that sig. You're "10.76 @ 126" car is NOT the fastest hyd. cam M6 346 (I'm assuming you meant in a F-body). I believe Pete (bspz28) is and he ran a 10.69 @ 128.
Chris
Chris
#198
TECH Resident
Join Date: Nov 2001
Location: Chattanooga,Tn
Posts: 917
Likes: 0
Received 0 Likes
on
0 Posts
Spin rumor from people that were there suggest different fuel was used and the car was dynoed in 5th gear. Can you post the run showing the speed to prove this rumor wrong?
#200
TECH Enthusiast
iTrader: (10)
Join Date: Dec 2003
Location: Central Kentucky
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Packy
He has no slips that back any of his claims except that his 12.7 pass. He has even been busted out by people for saying that his 12.7 pass was a bone stock pass too! He went on LS1.com back in the day and claimed that his bone stock 02 WS6 went 12.7@109 bone stock! He is a clown!