What RWHP?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have my build set up and am acquiring things now. But I am curious what the car will make or a ball park at least.
So the set up is on a 2000 ws6 M6. .410 gears, tsp 233/239 .600/.600 110 cam, tsp 1 7/8 headers and a 100 shot.
Thoughts on RWHP?
So the set up is on a 2000 ws6 M6. .410 gears, tsp 233/239 .600/.600 110 cam, tsp 1 7/8 headers and a 100 shot.
Thoughts on RWHP?
#5
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You might get low twelves on motor
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So ran the car today at the track..... With only headers, gears and 100 shot. At over 5000 feet above sea level.
Best time was a 13.4 at 110mph. With a 2.4 60’. I know I need to stick. If it sticks it will run a 12 easy.
Any ideas on how much mph the ms3 may pick up in the 1/4?
I am hoping to drive close to a second with the cam and a tune. It needs a tune.
Best time was a 13.4 at 110mph. With a 2.4 60’. I know I need to stick. If it sticks it will run a 12 easy.
Any ideas on how much mph the ms3 may pick up in the 1/4?
I am hoping to drive close to a second with the cam and a tune. It needs a tune.
Trending Topics
#10
11 Second Club
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Haven't been back on the dyno yet but @ 4000 rpm the rwhp was 474 and rwtq was 490. Had to end the session due to a fueling issue. How much power am I likely going to make and is this capable of 10's on just motor? The car is full weight with an LSX 427, 265cc heads, 243/251 115+4 LSA, Kooks 2" inch headers with 3" true dual exhaust, TR6060/T56 Magnum, Strange S60 turning a 28-10.5 slick.