Fireball Outlaw Drag Radial Rebuild Thread
04-22-2011, 05:17 PM
#1264
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
If anyone is interested in a repairable RHS std deck block...let me know. Block is filled and requires cooling system modifications...set up for race application.
I'm looking for $1000 + ship ...this price is FIRM.
specifically, the only problem is the base of the bores got beat up when the piston disintegrated. Needs #1 and #2 sleeves removed, some welding on the base of the bores, re machine the bores and install new liners. would most likely need a custom liner though since RHS doesn't offer an oversize liner for the block...shawn is supposed to snap some pics...
estimate was about 2K to fix:
cut out liners 1 & 2
weld up cylinder base damage
machine for new liners
install liners 1 & 2
line bore mains (if block warps)
line bore cam (if block warps)
roller cam bearings (if line boring required)
could have a top notch block for ~3K investment
I'm looking for $1000 + ship ...this price is FIRM.
specifically, the only problem is the base of the bores got beat up when the piston disintegrated. Needs #1 and #2 sleeves removed, some welding on the base of the bores, re machine the bores and install new liners. would most likely need a custom liner though since RHS doesn't offer an oversize liner for the block...shawn is supposed to snap some pics...
estimate was about 2K to fix:
cut out liners 1 & 2
weld up cylinder base damage
machine for new liners
install liners 1 & 2
line bore mains (if block warps)
line bore cam (if block warps)
roller cam bearings (if line boring required)
could have a top notch block for ~3K investment
Last edited by Fireball; 04-22-2011 at 05:26 PM.
04-23-2011, 02:22 PM
#1270
TECH Senior Member
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
don't get pissy dillweed....
feel free to start new threads all you want about your cad-rendered intake in the EXTERNAL ENGINE section...thats where it belongs
I didn't start a thread about my pit vehicle about it in the FI section...its just part of a bigger FI build thread
feel free to start new threads all you want about your cad-rendered intake in the EXTERNAL ENGINE section...thats where it belongs
I didn't start a thread about my pit vehicle about it in the FI section...its just part of a bigger FI build thread
Last edited by Fireball; 04-23-2011 at 02:29 PM.
04-23-2011, 09:27 PM
#1275
10 Second Club
Join Date: May 2008
Location: Cleveland GA USA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
don't get pissy dillweed....
feel free to start new threads all you want about your cad-rendered intake in the EXTERNAL ENGINE section...thats where it belongs
I didn't start a thread about my pit vehicle about it in the FI section...its just part of a bigger FI build thread
feel free to start new threads all you want about your cad-rendered intake in the EXTERNAL ENGINE section...thats where it belongs
I didn't start a thread about my pit vehicle about it in the FI section...its just part of a bigger FI build thread
04-24-2011, 12:11 PM
#1279
10 Second Club
Join Date: May 2008
Location: Cleveland GA USA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
04-24-2011, 01:01 PM
#1280
