Speed Engineering Race Version Headers Now Available!!
#1227
When did you guys release these?
https://www.speed-engineering.com/ls...2-ls3-ls6.html
Finally an affordable option for 3rd gens.
Maybe I'll swap out the 2nd gen set I modified for a set of these.
https://www.speed-engineering.com/ls...2-ls3-ls6.html
Finally an affordable option for 3rd gens.
Maybe I'll swap out the 2nd gen set I modified for a set of these.
#1228
bing98: We are currently out of stock on the Nova headers, but yes our part number 25-1027 will fit your chassis.
t_raven: We came out with the third gen headers back in January I believe. Sounds good.
Thanks
Sean
t_raven: We came out with the third gen headers back in January I believe. Sounds good.
Thanks
Sean
#1229
Hey man are these two sets the same?
I modified my 2nd gen set for my 3rd gen but haven't built a y pipe yet. Now that you have a 3rd gen set, I'm going to order those. I was going to save the 2nd gen set for a future project, but If they are the same as the C10 set I'll put those in my 67 GMC.
Thanks.
I modified my 2nd gen set for my 3rd gen but haven't built a y pipe yet. Now that you have a 3rd gen set, I'm going to order those. I was going to save the 2nd gen set for a future project, but If they are the same as the C10 set I'll put those in my 67 GMC.
Thanks.
#1233
I'm in the market for headers, I don't know a whole lot about cars so I will be having my mechanic install them, my question is how do I know whether I need the 1 3/4 or 1 7/8. Or is that a personal preference? Also do you have H pipes? I have a 2000 Camaro z28
#1235
Ok I found some universal H pipes, since this said it has a 3" collector, that would mean I need a 3" kit correct? My exhaust pipes are also 3" .I'm going to go with these speed engineering headers, just need to know 1 3/4 or 1 7/8. Edit: I'm thinking the 1 3/4 based on what I've read because my car isn't heavily modified, it has a k n cai, cattback exhaust, predator chip, and 4:10 gears. I just want to make sure the 1 3/4 are what I need before I order them
Last edited by Charles Lowe; 05-19-2017 at 12:41 PM.