When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
There has been so much talk about our LLR street solid cams that we thought we should share a fast hydraulic Cam Motion cammed car: this one fits the bill for sure. Here is a Hotrod Magazine article on a 1240 horsepower, 408", Trick Flow 225 headed, twin turbo Ford Pinto from Drag Week that ran 8 seconds flat at over 170 MPH.
I'm going to be in the market for a hydraulic roller whenever VaraRam releases their cross-ram intake for cathedral port LS motors. My combo is in the sig. Street car. What do recommend for a heavy,mostly street setup like mine?
I'm going to be in the market for a hydraulic roller whenever VaraRam releases their cross-ram intake for cathedral port LS motors. My combo is in the sig. Street car. What do recommend for a heavy,mostly street setup like mine?
PM Me your email address and I will send you our Cam Recommendation Sheet. Just fill out those details and email it to Kip@CamMotion.com. We will spec one out for you.
If you don't have a Drop Box account and you don't want one, just click the icon that says "No Thanks, Just Download" when it prompts you to create an account.
Last edited by CAMMOTION PERF; 10-26-2015 at 03:00 PM.
Well that's interesting, I had to strip down my motor do to bad nitrous tune, so im getting my ls3 heads cleaned up and exhaust ports opened alittle, thinking about changing cam ,so its a ls3 headed 408 with short travel hydraulic lifters, what you think for a cam ? and its on a 300 shot also, thanks
PM Me your email address and I will send you our Cam Recommendation Sheet. Just fill out those details and email it to Kip@CamMotion.com. We will spec one out for you.
If you don't have a Drop Box account and you don't want one, just click the icon that says "No Thanks, Just Download" when it prompts you to create an account.
Originally Posted by M.BOZZ
Well that's interesting, I had to strip down my motor do to bad nitrous tune, so im getting my ls3 heads cleaned up and exhaust ports opened alittle, thinking about changing cam ,so its a ls3 headed 408 with short travel hydraulic lifters, what you think for a cam ? and its on a 300 shot also, thanks
Same request as above please M.BOZZ. Please fill out the information form and send it to Kip. We will get you set up.