Another Hall's deal!!!
LS1TECH Sponsor
iTrader: (3)
I knew it was a Reserve unit but thought you had gone to the Actives, nice to be close to home at least! Tell Doug Perry hi if you see him. I think he is a Maj or Lt Col now. I worked with him in the Weapons shop up here at the Guard unit.
__________________
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
95 Pontiac Formula- Stock engine with ATI Procharger, Moser 12 bolt w/4:30 gears, Rossler trans, Neil Chance 4000 stall, M/T ET streets, 10.914@ 121.90mph, 1.452 60ft. GMHTP November 2010 Feature Car. Check it out at:
https://www.motortrend.com/features/...ebird-formula/
http://www.youtube.com/watch?v=abZ1z...ature=youtu.be
TECH Addict
iTrader: (17)
Nope, I will be a traditional Reservist, however they have told me I will be almost full time status most of the time. I don't know a lot of people in the unit yet because I haven't been there hardly at all. But I will make sure to tell Doug Perry "Hi" for you.
Last edited by CALL911; 09-27-2010 at 04:05 PM.
12 Second Club
Join Date: Aug 2007
Location: Ft Wayne
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Anybody have recommendations for a really good fence contractor? I need about 500 ft of ornamental aluminum/iron fence installed. If it didn't need to be perfect I'd do it myself.
Something like this.
Something like this.
11 Second Club
Join Date: Jul 2007
Location: Hoagland, IN
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Teching In
iTrader: (1)
Join Date: Apr 2008
Location: Manureville
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
12 Second Club
Join Date: Aug 2007
Location: Ft Wayne
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
TECH Apprentice
iTrader: (16)
Join Date: Feb 2008
Location: Fort Wayne, IN
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
I work for a high end home builder, and we typically go through either Arrow Fence or R&C. Regardless of who does the install, make sure you go with Ultra Aluminum Fence brand http://www.ultrafence.com
12 Second Club
Join Date: Aug 2007
Location: Ft Wayne
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Gleave is who I got the quote from and it was more reasonable than I thought. They seem like good people. Nick I took a look at Ultra Fence it is a little more heave duty material than what I was looking at which is good when you have a bunch of monsters, thanks.
TECH Fanatic
iTrader: (24)
J-Rod,
Yes, I'm alive, just been busy. Was trying to get my car done up and sorted before fall came, but no luck.
Ben,
I can scan your car when you get back in town if you want. It felt pretty well behaved when I drove it and I'm pretty good at picking up on problems.
Oh, I'm building an LT1 car right now.
-Blake
Yes, I'm alive, just been busy. Was trying to get my car done up and sorted before fall came, but no luck.
Ben,
I can scan your car when you get back in town if you want. It felt pretty well behaved when I drove it and I'm pretty good at picking up on problems.
Oh, I'm building an LT1 car right now.
-Blake
12 Second Club
iTrader: (1)
Join Date: Apr 2007
Location: Ft. Wayne, IN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Well turned out to have great weather today for a track rental. Made a PB 60' of 1.58 and fried the transmission in the process. It will not move in any gear. Clutch feels great and it shifts into all gears, but will not go anywhere. I have a feeling it never was right since it was built so it really doesn't surprise me. Time to learn how to build transmissions since you can't trust anyone to do anything right.
TECH Fanatic
iTrader: (24)
It's an 88 RX7 Turbo II.
Here's how I received it:
And progress so far:
TH350 time?
Broken input/output shaft perhaps?
Here's how I received it:
And progress so far:
Well turned out to have great weather today for a track rental. Made a PB 60' of 1.58 and fried the transmission in the process. It will not move in any gear. Clutch feels great and it shifts into all gears, but will not go anywhere. I have a feeling it never was right since it was built so it really doesn't surprise me. Time to learn how to build transmissions since you can't trust anyone to do anything right.
Broken input/output shaft perhaps?
TECH Addict
iTrader: (17)
There's quite a few RX-7 builds out there. As much as I love my LT1, I would probably rather do something more along the lines of what Nick is doing though if I had an RX-7 to play with.
The progress looks good though. Is he leaving the LT1 N/A?
The progress looks good though. Is he leaving the LT1 N/A?