Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Chevrolet Camaro or Pontiac Firebird Tire Repair and Maintenance
- Camaro and Firebird: Tires General Information and Specs
Step by step instructions for do-it-yourself repairs.
Browse all: Chevrolet Camaro or Pontiac Firebird Tire Repair and Maintenance
Wheels & Tires: Everything you should need to know is in here. A Must Read!!!!!!!
#902
im sorry i been on this forum all day and feel like an newb still, im sorry but i just need a direct answer, im geting (4) c5 zo6 motor sport rims at 18x9.5 and the tires are 275/35/18 , will these fit NP or will i need some adjustments? I've tried to understand all these charts but i am still a little confused, i would greatly appreciate some help )
#903
Im kinda in the same boat too, I read the first 8 pages, and couldnt see anything related.. I need another new set of tires, and Id like to go bigger on the rear. I have the stock 16inch rims on my 93Z, could I run a 275, or close to, on the back without any issues?
#904
Just like location, location, location......pictures, pictures, pictures. I know somebody is squared away enough to capture all this data, put it with some pics, and make another sticky.
This is about as confusing as the first day of Jumpmaster school:
1) Step one, take your working hand, with fingers and thumb extended and joined, run it across the ballistic helmet looking for cuts, frays, or burrs. Run your index finger of the working hand down the long continuous portion chinstrap until you reach the adjusting buckle on the jumpers right side.....blah blah blah blah. The tab thong, the slide fastener, the quick fit V ring, the metal adjuster, the diagonal back straps, aaaaaahhhh.
Like my wife speaking Norwegian to me........"what, hun"! ha ha
This is about as confusing as the first day of Jumpmaster school:
1) Step one, take your working hand, with fingers and thumb extended and joined, run it across the ballistic helmet looking for cuts, frays, or burrs. Run your index finger of the working hand down the long continuous portion chinstrap until you reach the adjusting buckle on the jumpers right side.....blah blah blah blah. The tab thong, the slide fastener, the quick fit V ring, the metal adjuster, the diagonal back straps, aaaaaahhhh.
Like my wife speaking Norwegian to me........"what, hun"! ha ha
#905
Thread Starter
TECH Senior Member
iTrader: (2)
Joined: Feb 2002
Posts: 12,091
Likes: 7
From: Schaumburg, IL
Im kinda in the same boat too, I read the first 8 pages, and couldnt see anything related.. I need another new set of tires, and Id like to go bigger on the rear. I have the stock 16inch rims on my 93Z, could I run a 275, or close to, on the back without any issues?
#906
Thread Starter
TECH Senior Member
iTrader: (2)
Joined: Feb 2002
Posts: 12,091
Likes: 7
From: Schaumburg, IL
im sorry i been on this forum all day and feel like an newb still, im sorry but i just need a direct answer, im geting (4) c5 zo6 motor sport rims at 18x9.5 and the tires are 275/35/18 , will these fit NP or will i need some adjustments? I've tried to understand all these charts but i am still a little confused, i would greatly appreciate some help )
#907
Thread Starter
TECH Senior Member
iTrader: (2)
Joined: Feb 2002
Posts: 12,091
Likes: 7
From: Schaumburg, IL
Just like location, location, location......pictures, pictures, pictures. I know somebody is squared away enough to capture all this data, put it with some pics, and make another sticky.
This is about as confusing as the first day of Jumpmaster school:
1) Step one, take your working hand, with fingers and thumb extended and joined, run it across the ballistic helmet looking for cuts, frays, or burrs. Run your index finger of the working hand down the long continuous portion chinstrap until you reach the adjusting buckle on the jumpers right side.....blah blah blah blah. The tab thong, the slide fastener, the quick fit V ring, the metal adjuster, the diagonal back straps, aaaaaahhhh.
Like my wife speaking Norwegian to me........"what, hun"! ha ha
This is about as confusing as the first day of Jumpmaster school:
1) Step one, take your working hand, with fingers and thumb extended and joined, run it across the ballistic helmet looking for cuts, frays, or burrs. Run your index finger of the working hand down the long continuous portion chinstrap until you reach the adjusting buckle on the jumpers right side.....blah blah blah blah. The tab thong, the slide fastener, the quick fit V ring, the metal adjuster, the diagonal back straps, aaaaaahhhh.
Like my wife speaking Norwegian to me........"what, hun"! ha ha
Please . . . it's not rocket science. I'm self taught on this stuff. . . .
#908
C6 ZO6 Wheels
I debating on buying some C6 ZO6 wheels. They r the five star double spoke polished wheels. The seller just bought some other wheels for his ZO6. The problem is that i have read about people installing 11s in the back, and these r 12s. Is it even possible to get these wheels on my 98' WS6 TA? The front ZO6 wheels are 18x9.5 +40, and rears he said are 19x12 +59. I have already read the notes but still dont know if i can get them on without to much of a problem. Im pretty sure the fronts go right on, but, the rears r what i have the most concerns.
I will be waiting for ur answers, Thank You.
If anyone has the wheels already on a TA can u post some pics!!
I will be waiting for ur answers, Thank You.
If anyone has the wheels already on a TA can u post some pics!!
#910
Thread Starter
TECH Senior Member
iTrader: (2)
Joined: Feb 2002
Posts: 12,091
Likes: 7
From: Schaumburg, IL
I debating on buying some C6 ZO6 wheels. They r the five star double spoke polished wheels. The seller just bought some other wheels for his ZO6. The problem is that i have read about people installing 11s in the back, and these r 12s. Is it even possible to get these wheels on my 98' WS6 TA? The front ZO6 wheels are 18x9.5 +40, and rears he said are 19x12 +59. I have already read the notes but still dont know if i can get them on without to much of a problem. Im pretty sure the fronts go right on, but, the rears r what i have the most concerns.
I will be waiting for ur answers, Thank You.
If anyone has the wheels already on a TA can u post some pics!!
I will be waiting for ur answers, Thank You.
If anyone has the wheels already on a TA can u post some pics!!
#912
https://ls1tech.com/forums/wheels-tires/964653-c6z06-19x12s-325s-camaro.html
there it is. he explained what he did as well
there it is. he explained what he did as well
#913
Y2Ks
I recently purchased a set of OE Y2Ks. 17x8.5(front), 18x9.5(rear).
I should have read this more in depth before my purchase. The wheels look OK but I expected a more aggressive look. It bothers me when Im walking towards my car and the rear wheels look really tucked in. What kind of spacer or what do I need to get that look that i so desire. I have seen other TAs with the same wheels and they look fine. I guess they were smart enough and bought the replicas with different offset. I have 245/45(front) and 275/40(rear) on the wheels. PLEASE HELP!!!!
I should have read this more in depth before my purchase. The wheels look OK but I expected a more aggressive look. It bothers me when Im walking towards my car and the rear wheels look really tucked in. What kind of spacer or what do I need to get that look that i so desire. I have seen other TAs with the same wheels and they look fine. I guess they were smart enough and bought the replicas with different offset. I have 245/45(front) and 275/40(rear) on the wheels. PLEASE HELP!!!!
#914
Thread Starter
TECH Senior Member
iTrader: (2)
Joined: Feb 2002
Posts: 12,091
Likes: 7
From: Schaumburg, IL
I recently purchased a set of OE Y2Ks. 17x8.5(front), 18x9.5(rear).
I should have read this more in depth before my purchase. The wheels look OK but I expected a more aggressive look. It bothers me when Im walking towards my car and the rear wheels look really tucked in. What kind of spacer or what do I need to get that look that i so desire. I have seen other TAs with the same wheels and they look fine. I guess they were smart enough and bought the replicas with different offset. I have 245/45(front) and 275/40(rear) on the wheels. PLEASE HELP!!!!
I should have read this more in depth before my purchase. The wheels look OK but I expected a more aggressive look. It bothers me when Im walking towards my car and the rear wheels look really tucked in. What kind of spacer or what do I need to get that look that i so desire. I have seen other TAs with the same wheels and they look fine. I guess they were smart enough and bought the replicas with different offset. I have 245/45(front) and 275/40(rear) on the wheels. PLEASE HELP!!!!
#915
Xsta Z 28, I was trying to install 17x11 Zr1's with a 50+mm offset on the rear of my Trans Am today and ran into a problem. The wheel itself without a tire on it yet would not even fit without rubbing the fender well. I am at stock ride height with a Moser 9. I also have an adjustable panhard bar. I was wondering what the problem could possibly be for it to be rubbing this much already without having tires on it yet!?!?! Thank You.
#916
Thread Starter
TECH Senior Member
iTrader: (2)
Joined: Feb 2002
Posts: 12,091
Likes: 7
From: Schaumburg, IL
Xsta Z 28, I was trying to install 17x11 Zr1's with a 50+mm offset on the rear of my Trans Am today and ran into a problem. The wheel itself without a tire on it yet would not even fit without rubbing the fender well. I am at stock ride height with a Moser 9. I also have an adjustable panhard bar. I was wondering what the problem could possibly be for it to be rubbing this much already without having tires on it yet!?!?! Thank You.
Was the wheel rubbing the wheel well, or the "bumpstop" bracket?
Were you test fitting the wheel with the axle supported or the axle hanging?
A 50 mm offset 11" wide wheel should fit, with very little clearance.
#917
Tire sizes for wheels
ok so im going to be putting zr1s on the camaro 17x9.5 front and 17x11 rear...
the rear tires im looking at are the mickey thompson et street radials P315/35R17
anyone have an idea of what i should put on the front so it doesnt look stupid?
the rear tires im looking at are the mickey thompson et street radials P315/35R17
anyone have an idea of what i should put on the front so it doesnt look stupid?
#919
You can go with either a 275/40/17 or 285/40/17.
#920
Quick question..........
99 Z28, stone stock ride height....looking to avoid BFH or lip rolling.
What is the best set up front & rear for 17" Torque Thrust 2s and what size rubber would you recommend to go along with it?
Thanks!
99 Z28, stone stock ride height....looking to avoid BFH or lip rolling.
What is the best set up front & rear for 17" Torque Thrust 2s and what size rubber would you recommend to go along with it?
Thanks!