Post your CARNAGE pics!
#2
11 Second Club
iTrader: (27)
Join Date: May 2005
Location: Your girl's back door giving her the long stroke while you're at work
Posts: 6,801
Likes: 0
Received 3 Likes
on
3 Posts
i won't win but i'll play. This happened to my 35K mile CETA
Smoked the #7 piston and spun two bearing, #5 and #6; those bearing were fused to the rods and wouldn't come off. The crank is now a paperweight and the block needs a new sleeve
EDIT: due to this slow *** interent over here I can't upload the pics
Smoked the #7 piston and spun two bearing, #5 and #6; those bearing were fused to the rods and wouldn't come off. The crank is now a paperweight and the block needs a new sleeve
EDIT: due to this slow *** interent over here I can't upload the pics
#6
TECH Fanatic
iTrader: (23)
sup,
I need to get the rest of the pictures. These are only half the damage.
https://ls1tech.com/forums/11245575-post18.html
Total damage of the LS3:
1 broken in half valve
1 busted lifter, all the rest apear worn
3 bent valves
1 missing piston
1 piston broken off the rod
2 bent rods
1 spun bearning
2 cylinder sleeves with lots of chunks missing
cracked block
camshaft scored on a few lobes
both heads need lots of work
windage tray bent
Crank scored up
Oil pump burnt up
I need to get the rest of the pictures. These are only half the damage.
https://ls1tech.com/forums/11245575-post18.html
Total damage of the LS3:
1 broken in half valve
1 busted lifter, all the rest apear worn
3 bent valves
1 missing piston
1 piston broken off the rod
2 bent rods
1 spun bearning
2 cylinder sleeves with lots of chunks missing
cracked block
camshaft scored on a few lobes
both heads need lots of work
windage tray bent
Crank scored up
Oil pump burnt up
Trending Topics
#9
8 sec potential, 12 sec slip
iTrader: (50)
I won't win either, but I'll play too..
broken ringland on #5 cylinder from my stock LS1:
It also put a hairline crack in the block in the cylinder sleeve there too on the stock LS1, but I have no picture of that.
Here is the most recent carnage on the LS6 I replaced it with:
Happened to notice that beauty after tearing apart the top end to check things out after my LS6 intake manifold blew up:
Currently workin on putting together a 370 iron block with BBK manifold... Hopefully I won't have any carnage pics from this. That **** gets expensive!
broken ringland on #5 cylinder from my stock LS1:
It also put a hairline crack in the block in the cylinder sleeve there too on the stock LS1, but I have no picture of that.
Here is the most recent carnage on the LS6 I replaced it with:
Happened to notice that beauty after tearing apart the top end to check things out after my LS6 intake manifold blew up:
Currently workin on putting together a 370 iron block with BBK manifold... Hopefully I won't have any carnage pics from this. That **** gets expensive!
#12
OWN3D BY MY PROF!
iTrader: (176)
This was the sttock engine in my Formula. It hydrolocked when I went to start it after sitting through some rain on jack stands:
https://ls1tech.com/forums/generatio...yesterday.html
See posts 1 and 19 for pictures.
The best carnage I've ever seen was from Brad8266 where it ripped the front corner of the block off.
https://ls1tech.com/forums/generatio...ood-stuff.html
https://ls1tech.com/forums/generatio...yesterday.html
See posts 1 and 19 for pictures.
The best carnage I've ever seen was from Brad8266 where it ripped the front corner of the block off.
https://ls1tech.com/forums/generatio...ood-stuff.html
#13
This was the sttock engine in my Formula. It hydrolocked when I went to start it after sitting through some rain on jack stands:
https://ls1tech.com/forums/generatio...yesterday.html
See posts 1 and 19 for pictures.
The best carnage I've ever seen was from Brad8266 where it ripped the front corner of the block off.
https://ls1tech.com/forums/generatio...ood-stuff.html
https://ls1tech.com/forums/generatio...yesterday.html
See posts 1 and 19 for pictures.
The best carnage I've ever seen was from Brad8266 where it ripped the front corner of the block off.
https://ls1tech.com/forums/generatio...ood-stuff.html
#16
The best carnage I've ever seen was from Brad8266 where it ripped the front corner of the block off.
https://ls1tech.com/forums/generatio...ood-stuff.html
When I saw the thread title, my first thought was: We have a winner! and that is the thread I was thinking about