New cams from Tick Performance
well? huh huh? dont keep us waiting.
TECH Apprentice
Joined: Nov 2004
Posts: 330
Likes: 1
From: Podunk Ky fools!
Torque looks good. Peaks out at 5800. Dyno Dynamics-340hp/335tq. All and all the car runs good on the dyno. Getting an alignment in the morning and can get better feel. Needs to be driven since the hydraulics were messed with and brakes are brand new so. Graph be up when I get it.
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
Torque looks good. Peaks out at 5800. Dyno Dynamics-340hp/335tq. All and all the car runs good on the dyno. Getting an alignment in the morning and can get better feel. Needs to be driven since the hydraulics were messed with and brakes are brand new so. Graph be up when I get it.
TECH Apprentice
Joined: Nov 2004
Posts: 330
Likes: 1
From: Podunk Ky fools!
Unfortunately no. Sometime this Spring my old man(his H/C/I/E '03 ZO6) and me plan on maybe going to another dyno to have an idea. No doubt it is a different car for sure. Really surprised though it peaked at 5800. It didn't want to go anymore than that. Played with lean and rich, and my car wanted more fuel and timing lol. Runs like a scolded ape. Now granted my hydraulics were disconnected and brakes are brand new, it is a little harder to drive for the time being. Air is working its way out of the hydraulics and getting a better pedal making it easier. From 2500 I think it was to mid 4000 that TQ curve was there. I'll post the graph once he has a chance to email it to me. I seen it so I don't care but like to atleast show you Martin.
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
Unfortunately no. Sometime this Spring my old man(his H/C/I/E '03 ZO6) and me plan on maybe going to another dyno to have an idea. No doubt it is a different car for sure. Really surprised though it peaked at 5800. It didn't want to go anymore than that. Played with lean and rich, and my car wanted more fuel and timing lol. Runs like a scolded ape. Now granted my hydraulics were disconnected and brakes are brand new, it is a little harder to drive for the time being. Air is working its way out of the hydraulics and getting a better pedal making it easier. From 2500 I think it was to mid 4000 that TQ curve was there. I'll post the graph once he has a chance to email it to me. I seen it so I don't care but like to atleast show you Martin.
Valve train noise?
TECH Apprentice
Joined: Nov 2004
Posts: 330
Likes: 1
From: Podunk Ky fools!
on the motor side it is smooth and quiet, I still have a little sewing machine it sounds like on the exhaust side. It is noticeable but nothing extreme. Guess you have to know what you are looking for, a few ppl have yet to notice it. Guess since it my car I can tell. The old setup was 6 years old so I knew it in and out. But like I said on the phone, it sounds like it is just resonating with my cheapo headers and y pipe. I am happy with it so far. Not sure if James will chime in about or not, told him about the thread, he might.
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
on the motor side it is smooth and quiet, I still have a little sewing machine it sounds like on the exhaust side. It is noticeable but nothing extreme. Guess you have to know what you are looking for, a few ppl have yet to notice it. Guess since it my car I can tell. The old setup was 6 years old so I knew it in and out. But like I said on the phone, it sounds like it is just resonating with my cheapo headers and y pipe. I am happy with it so far. Not sure if James will chime in about or not, told him about the thread, he might.
Shoot me a PM and I can probably help you out there.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo TECH Apprentice
Joined: Nov 2004
Posts: 330
Likes: 1
From: Podunk Ky fools!
Just keeps pulling. 2nd dont seem to last long. Runs solid and happy, still have other issues with leaking trans and pulley squeal(idler and Katech tensioner I think are at their limit. Over 6+ yrs old.)
on the motor side it is smooth and quiet, I still have a little sewing machine it sounds like on the exhaust side. It is noticeable but nothing extreme. Guess you have to know what you are looking for, a few ppl have yet to notice it. Guess since it my car I can tell. The old setup was 6 years old so I knew it in and out. But like I said on the phone, it sounds like it is just resonating with my cheapo headers and y pipe. I am happy with it so far. Not sure if James will chime in about or not, told him about the thread, he might.
I placed my order for the SNS Stage 2 cam package last night! After reading this thread I am excited! It will be a fun summer
Thread Starter
FormerVendor
iTrader: (3)
Joined: Feb 2012
Posts: 7,480
Likes: 18
From: Mount Airy, NC
TECH Apprentice
Joined: Nov 2004
Posts: 330
Likes: 1
From: Podunk Ky fools!
TECH Apprentice
Joined: Nov 2004
Posts: 330
Likes: 1
From: Podunk Ky fools!
Ehh, I do but it crappy. It was untuned and running rough. I need a new one. May try to do one later. My Optima is being a Pain in the *** and not holding charge. Just left me stranded at Sams club lol. So when I go to swap it here in a few after I relax I'll take the point and shoot camera.
Ehh, I do but it crappy. It was untuned and running rough. I need a new one. May try to do one later. My Optima is being a Pain in the *** and not holding charge. Just left me stranded at Sams club lol. So when I go to swap it here in a few after I relax I'll take the point and shoot camera.
But Im now thinking of getting a yellow top and try it out.