Last edit by: IB Advertising
See related guides and technical advice from our community experts:
--
See related guides and technical advice from our community experts:
Browse all: Brake Guides
- Camaro and Firebird Brake Modifications<br>Overview of popular modifications to customize your Camaro or Firebird.
--
See related guides and technical advice from our community experts:
- Chevrolet Camaro 2010-2015: Brake Modifications
Overview of popular modifications to customize your Camaro
Browse all: Brake Guides
CTS-V Brake Install w/ Pics
#342
TECH Addict
iTrader: (2)
THats cool then. Must be specailly made to fit skinnys. My only question is why would you get huge front brakes if your using skinnys? unless you switch em up between the track and street? I dont really do skinnys so im not sure. Not my style. but cool they made 17" fit the ctsv calipers. Wish i could fit them with my regular 17" rims lol
#347
gm high tech did a writeup on this mod using 09-10 cts-v calipers, the 6 piston calipers. everything goes the same, but i think its cool that these fit too. instead of having to run corvette calipers and the brackets to get the 6 piston fronts.
only down side: i checked gmpartsdirect and the newer calipers are 330 a piece...vs. 140 for the older 4 piston calipers. still have about 8-900 bucks in the front brakes with 6 piston calipers tho!
http://www.gmhightechperformance.com...bc_rotors.html
only down side: i checked gmpartsdirect and the newer calipers are 330 a piece...vs. 140 for the older 4 piston calipers. still have about 8-900 bucks in the front brakes with 6 piston calipers tho!
http://www.gmhightechperformance.com...bc_rotors.html
Last edited by zacht; 09-07-2011 at 07:01 PM.
#348
11 Second Club
iTrader: (7)
Join Date: Sep 2005
Location: Eagle Pass, TX
Posts: 1,930
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know if these will fit on my '00 Z28 with CCW 505a's that have a corvette backspacing of 775mm? (not sure of the offset)
NM, CCW told me I would need a 3/4" spacer or more for fit these on my Z since my front offset is 57mm.
They advised me that a C6 Z51 caliper set up would be my best bet based on my setup.
(hope this helps someone else)
NM, CCW told me I would need a 3/4" spacer or more for fit these on my Z since my front offset is 57mm.
They advised me that a C6 Z51 caliper set up would be my best bet based on my setup.
(hope this helps someone else)
Last edited by PERFECT Z28; 09-27-2011 at 11:04 AM. Reason: added answer
#352
Staging Lane
iTrader: (1)
Join Date: Feb 2011
Location: Rapid City, SD
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
I have read this entire forum and looked and even tried looking through gmpartsdirect, does anyone know what the loaded calipers are or what all I would need to order to make these, tried calling some salvage yards around me and all of them are completely lost as to what a CTS-V is.
#354
TECH Junkie
iTrader: (4)
I have a set I'll sell. One was test fitted. Other side never installed.
Have the flynbye lines brand new and hawk pads
Email me an offer
Toniorusso@gmAil.com
Do not pm me. I don't come on here anymore
Have the flynbye lines brand new and hawk pads
Email me an offer
Toniorusso@gmAil.com
Do not pm me. I don't come on here anymore
Last edited by Tudds; 12-17-2011 at 07:43 AM.
#359
TECH Resident
iTrader: (1)
Join Date: Jan 2004
Location: Patterson, CA
Posts: 858
Likes: 0
Received 0 Likes
on
0 Posts
I just did the install a week or 2 ago. 18x9.5 C5 deep dish, used the 12mm spacer. and had plenty of room. easily stick my thumb in between the caliper and spoke. its been raining so havnt had a chance to get pics. will get pics soon.