Orygun guys?
12-29-2009, 09:17 PM
#2401
On The Tree
Join Date: Nov 2009
Location: Canby, Oregon
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Ohh i know the harness is looking pretty scary at this moment but damn im to cheap to send it in when i have my own two hands.. So i decided im gonna start on it tomorrow. Hopefully i wont mess it up to much? ha
Ill look him up, see if its the Camaro i see runnin around town or not..
And to tell you the truth, uhh i disconnected everything got the engine out and everything in a day. But once i hit the part where i actually need money my build has kinda stopped
Ehh im not totally sure what cam yet, i was looking at some comp cams but i still have to narrow down which one will fit me ya know? Cause its gonna be my DD to school, work, and home. But i wont mind showin up some of my mustang friends at school with a mild/high cam
Ill look him up, see if its the Camaro i see runnin around town or not..
And to tell you the truth, uhh i disconnected everything got the engine out and everything in a day. But once i hit the part where i actually need money my build has kinda stopped
Ehh im not totally sure what cam yet, i was looking at some comp cams but i still have to narrow down which one will fit me ya know? Cause its gonna be my DD to school, work, and home. But i wont mind showin up some of my mustang friends at school with a mild/high cam
12-30-2009, 08:05 AM
#2403
yeah the whole money thing sucks!!! That's pretty good for ony one day pulling the motor out!! You have a shop?
Yeah I'm pretty sure it's him, if it's a peuter color with a black scoop on it.
Mines a DD also and I would love a big cam in it and love to pull up and have everybody looking at you when you pull up is PRICELESS!!.
Yeah I'm pretty sure it's him, if it's a peuter color with a black scoop on it.
Mines a DD also and I would love a big cam in it and love to pull up and have everybody looking at you when you pull up is PRICELESS!!.
Ohh i know the harness is looking pretty scary at this moment but damn im to cheap to send it in when i have my own two hands.. So i decided im gonna start on it tomorrow. Hopefully i wont mess it up to much? ha
Ill look him up, see if its the Camaro i see runnin around town or not..
And to tell you the truth, uhh i disconnected everything got the engine out and everything in a day. But once i hit the part where i actually need money my build has kinda stopped
Ehh im not totally sure what cam yet, i was looking at some comp cams but i still have to narrow down which one will fit me ya know? Cause its gonna be my DD to school, work, and home. But i wont mind showin up some of my mustang friends at school with a mild/high cam
Ill look him up, see if its the Camaro i see runnin around town or not..
And to tell you the truth, uhh i disconnected everything got the engine out and everything in a day. But once i hit the part where i actually need money my build has kinda stopped
Ehh im not totally sure what cam yet, i was looking at some comp cams but i still have to narrow down which one will fit me ya know? Cause its gonna be my DD to school, work, and home. But i wont mind showin up some of my mustang friends at school with a mild/high cam
12-30-2009, 12:53 PM
#2404
On The Tree
Join Date: Nov 2009
Location: Canby, Oregon
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
99Blanco I still have the stock LS1 intake but later in the future im lookin at the LS6 intake, and farther in the future a FAST 90.. But currently i dont plan on modding it up farther then a cam and bolt-ons. Ya im lookin at a 224/224 or maybe a xr275hr cam..
Ha in Canby there are approximately 4 camaros and 2 Trans ams. both TA and 2 camaros are v6 so that one other v8 is pretty easy to spot out..
Ya i still live at home (since im in high school lol) but my dad has his own shop at home so i just pulled in there got the fork lift unbolted everything and dropped the engine out. It went really fast and i did alot of research before hand so there were minimal surprises ha.
Oh ya i cant wait for that lopey rumble when i get my cam in it
Ha in Canby there are approximately 4 camaros and 2 Trans ams. both TA and 2 camaros are v6 so that one other v8 is pretty easy to spot out..
Ya i still live at home (since im in high school lol) but my dad has his own shop at home so i just pulled in there got the fork lift unbolted everything and dropped the engine out. It went really fast and i did alot of research before hand so there were minimal surprises ha.
Oh ya i cant wait for that lopey rumble when i get my cam in it
I bet those cost a pretty penny
12-30-2009, 10:20 PM
#2409
TECH Apprentice
iTrader: (6)
Join Date: Oct 2007
Location: Newberg Oregon
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
The Poncho had to stay the night at work. I tried moving it but only got about 100 yds. spinning the whole way. I had to have people push me.
Mike what crank are you using stock?
Mike what crank are you using stock?
12-31-2009, 01:28 AM
#2412
12 Second Club
iTrader: (2)
Join Date: Oct 2006
Location: Oregon
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
99Blanco I still have the stock LS1 intake but later in the future im lookin at the LS6 intake, and farther in the future a FAST 90.. But currently i dont plan on modding it up farther then a cam and bolt-ons. Ya im lookin at a 224/224 or maybe a xr275hr cam..
Ha in Canby there are approximately 4 camaros and 2 Trans ams. both TA and 2 camaros are v6 so that one other v8 is pretty easy to spot out..
Ya i still live at home (since im in high school lol) but my dad has his own shop at home so i just pulled in there got the fork lift unbolted everything and dropped the engine out. It went really fast and i did alot of research before hand so there were minimal surprises ha.
Oh ya i cant wait for that lopey rumble when i get my cam in it
Ha in Canby there are approximately 4 camaros and 2 Trans ams. both TA and 2 camaros are v6 so that one other v8 is pretty easy to spot out..
Ya i still live at home (since im in high school lol) but my dad has his own shop at home so i just pulled in there got the fork lift unbolted everything and dropped the engine out. It went really fast and i did alot of research before hand so there were minimal surprises ha.
Oh ya i cant wait for that lopey rumble when i get my cam in it
Hey, im from Canby with the Lowered Pewter SS. when you putting in the cam?
12-31-2009, 01:54 AM
#2414
On The Tree
Join Date: Nov 2009
Location: Canby, Oregon
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Heyy TylerLs1 ya i have seen you mobbin around here and there. I actually have to admit that i drove by your camaro one time with my sister and sayin woww thats a badass ride!
But ya probably not till spring break since the motor is still out so im just drivin my dads farm truck around ha.
My friend from newberg was tellin me they got a good amount of snow. Lame Canby.
But ya probably not till spring break since the motor is still out so im just drivin my dads farm truck around ha.
My friend from newberg was tellin me they got a good amount of snow. Lame Canby.
12-31-2009, 02:19 AM
#2416
On The Tree
Join Date: Nov 2009
Location: Canby, Oregon
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Nah thats some dude who works at dominos pizza.. I have the greenish teal one with a bra, gotta keep her decent ha, but my sister has had it for the last couple years in washington for college and i got it this summer and decided to drop the LS1 in. So it will be out of commission for a while.
12-31-2009, 12:52 PM
#2418
Stock crank for this next season. I can't afford another grand for a stroker crank until I get back to work. For now it's just going to be a high winding little ol' 371ci with big heads and big cam.
Mike
12-31-2009, 01:30 PM
#2420
TECH Apprentice
iTrader: (6)
Join Date: Oct 2007
Location: Newberg Oregon
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Ya the locker is obnoxious kind of thinking spool would have been the better route but now its in I will just deal with it. What's even more obnoxious is I pulled my y-pipe off on tuesday over a speed bump and kind of just helped it get close to the header, now it runs so Rich and there is so much fuel going out the pipes it looks like my car is on fire going down the road.