View Full Version : Drag Racing Tech
- paging shedevilLs1
- Sub Frame Connectors good for Drag Racing?
- What do you all think about this?
- Best compromise tire for the "weekend warrior"?
- Best compromise tire for the "weekend wwarrior"?
- 17 inch et streets anyone tried them yet??
- Has anyone tried the new 17" et streeets??
- What is your first impression of this??
- Drag Racing 101
- 2002 WS6
- What the heck?
- LT1 Throttle Stop???
- Fastest 4L60, 10 bolt list start here...
- What are the TEA headed cars running at the track?
- Are swing out doors IRHA legal??
- Car is almost ready!!!
- Front skinnies that don't need spacers and fit
- Sub 12 second cars only please.
- August in California and Utah
- Anyone going to the NMCA race in Commerce, GA March 14 - 16.
- New setup... Do you think I can go 10's??
- Pains Pics
- Time for new slicks?
- CARTEKs 98 Z28,for those who havent seen it
- Using Spare with good tire as drag Skinny?
- Will true duals and x pipe clear Spohn Torque Arm?
- 4pt harness
- ABS Delete>>>
- This month's GMHTP, congrats to Inurdrmz for getting the cover!
- WHATS THE BEST SLICKS?
- In the process of removing dash....can't get one area free
- need helmet & safety loop?
- Roll bar question
- will the hal shocks pick up any et
- Anyone try a "cool can" on their f-body yet?
- To all who have removed the rear bumper support
- How bad do ET streets drift on the topend?
- ABS delete??
- ne 1 know where the launch pics went?
- disaster at the strip... Possible bent pushrods.....
- Kuwait : 10.6s @ +128 mph N/A throgh 346 c.i. & M6 w/ ARE heads + TR 230/224 ( long )
- Temp tire for strip?
- best 60' with nitto DR
- will 26/10 /15 Drag ET's solve traction problems
- Carlsbad re-opening: March 1st!
- Why is the 1/4 Mile and ET list inop?
- Attention PAIN
- Part number for Centerline Convo Pro's for F-bods?
- Whats the minimum type truck that I can use to tow my camaro?
- A few progress pics
- How do QTP's hook vs. regular hoosiers?
- M6 question on Drag tires
- lightest 17" wheel available
- Which Camaro Spoiler is Optimum for Drag Racing?
- Best dragtire to get?
- Will I run out of RPM's
- how to screw tires to rims?
- My Z's first track day
- Who has the fastest N/A LS1 convertible?
- need sizes for 15 inch race wheels
- Anyone have pics of their speed inc carpet installed?
- Best QUIET torque arm for drag racing?
- TH350/3.23's track results!
- Weight lose? Door Braces? Filter?
- Fastest (almost) stock A4?
- Who runs ET Drags tubeless?
- Getting 12 bolt with 383, which tires?
- Let's petition the NHRA to ease the Rollbar rule on late model cars:
- Anyone notice a drop in et with poly torque arm bushing?
- Weighed the car today....
- How much can I gain in the 1/8 going from a vig 2800 to a vig3600?
- I got a new best and possibly record on Nittos,m6
- SWAY BAR
- 17" ET Streets available?? So i hear
- Is this possible
- PA Racing A-arms and sway bar mounting question.
- Got a new best ET!
- Do you screw your ET Streets
- Doorslammer breaks into the 5's!
- Where did you guys buy your Hawker Genesis battery from?
- Coming along . . .
- HEY BILLINGSLEY WHATS UP ON THE ...
- C5 Corvette Vs 2002 Z28
- My 10.9@125 pass.
- ET Street Question
- TA pulling the wheels in second gear
- Launch technique...
- SLP Day..any LG heads and cam guys run?
- Ur thoughts on my setup
- My videos:
- Finally a new best with NO money spent :)
- NEW BEST
- 10W tires
- MTI heads/Cam guys inside.. Please convince me!
- Hey JPJBC or J2KSS...
- harlen 2 step
- Paging Jason99TA
- lightweight battery and underdrive pulley
- 1LE Drag Racing Adjustment Help
- Need battery relocation info
- First Female Member in the 11's with an M6 car?
- Free Mod Help please!!
- anyone with absolute speed stage 1x or 2 heads come inside please
- Info on JEGS 8pt. cage.
- The 9 second 346 list starts here.
- 2003 IHRA TV schedule!!!!
- Who makes the best line lock kit SLP ,Thunder etc..?
- 346 goes 9's!!!
- Rear spring rubber removal?
- Oil?? What you use???
- Ennis, Texas.
- MT ET Streets, who's running inner tubes?
- Where does the line get drawn?
- So what IS gonna be considered the fastest LS1?
- GUESS MY RWHP
- Inviting everyone to my webpage!!!!
- Weight Reduction vs. et and mph
- What is considered a good HC ET with full interior?
- It's on next Sat.!!! Me and my buddy Jeff at Steele in his Bennett powered Mustang!
- Has any one fit a 29 inch tire on there f-body?
- 275/50 15 drag radials?
- WHAT KIND OF 60FTS SHOULD I HAVE
- Paging Hoffpauir regarding your 275-60-15 Nitto DR's.
- Help me pick tires for my new drag wheels/gears!!
- What is the shortest gear ratio I can go for it w/o shifting to 5th gear ??
- What Drive Shaft loop fits Convertibles?
- Oh so close 10.04 @ 138.58
- well alan, 9's?????
- Torque convertor et improvements
- How many people have a race car that they drive on the street?
- Info , and pics ..UPDATED!
- FS: Stock Eliminator C/SA C5
- How Many Miles Do You Think You Average...
- Kuwait : almost 10.7s@ almost 127mph with ARE S3heads+MTI X1 hyd. cam+346 c.i.+M6+N/A
- What gains with converter lock-up switch
- I need help in the Charleston, SC area please!!!
- no 9's for me with stock bottom end...
- Brent, Mark, Bill, Robert and Les win the first five places in the Breathless shoot o
- Will I notice a difference with Drag Springs?
- Bolt on performance mods
- Weight reductin list?
- What would you racers do? tire/gearing
- remove sway bar?
- Chevy vs Ford Dyno Race in Seattle area
- Who's got the fastest "stock" bottom end LT1 out there?
- New CHP Magazine??
- I need some Pro Tree advice
- What PSI to run Nitto's ?
- 7 week withdrawal
- North vs. South Shootout Info
- Spohn Torque Arm on Lowered Car
- NHRA/IHRA Rules on Parachutes?
- No go for Launch
- Another video from Wednesday night - 10.74@128.98
- Whats your best 60 ft on ET Streets or QTP`s
- how much do Hoosier slicks grow in the 1/4?
- Finally - Video of 10.16 Nitrous Run
- Quickest bolt on car w/2.73 gears
- Drag shocks
- What to launch at with new setup?
- Coach, Jason, Allan, Joe, Tony...
- Weight reduction questions.... SOTP gain???
- 396 ci" performance engine for sale
- had fun at the Vette, Viper,F-Body shootout
- What is the weight of a C5 or Z06?
- Hoosier 28 x 10 x 16 slicks?
- 2003 NHRA TV schedule!!!!
- are these dyno numbers alright
- weighed the car- TA
- Paging Coach...
- High Horsepower H/C Hydr Roller Cam Cars!!!!
- Dyno help needed.
- Stock-headed LT1, CC305 - New Best - Video
- Finally Got into the 12's!!
- TRUE 10" TIRE SHOOT OUT!!!
- Hawker battery
- Free bracket racing at Rockingham nc sunday?
- wheel stud for 10 bolt, part number?
- anyone have the video of the thunder race
- wanting to remove the abs/hcu
- Fitting 28"x12.5" ET Street
- need weight difference b/w A4 and MN6 trannys.
- Fastest 346ci N/A A3 Record (Who has it?)
- Light weight k-member install - has anyone seen a write up?
- big air racers, got a question...
- another airbag post got a ?
- History making LS1
- Tom the Roofer!!
- ET street owners.....
- What shifter are you guys getting rid of pro 5.0 for?
- 10.59@128.68, 1.43 60' - 346ci 6-speed ALL MOTOR!
- Working it down 10.09@136.80
- New Bogart RT series, gauging interest
- WANT TO GO FAST, HELP!
- Removing the power steering pulley...
- Weight of Car???
- Open headers , is it worth in 1/4 mile ??
- 26x10.5 x16 vs 26x10.5x15
- SLP Custormer Appreciation Day in Ennis.
- Going from A4 to a 400T, what's your ET difference?
- Hoping for deep 10's
- Thunder Shootout.... High resolution pictures????
- has anyone...
- 11.51 @ 121!!! finally
- What would my 427 run?
- 28" slicks on lowered T/A...
- 2/3/03 Hey Terry...
- How much can running rich affect your times?
- Need some help on another board from those with 230 or bigger cams w/ stock LS1 heads
- Tire and gearing question
- A4 Heads/Cam/YANK TQ Converter guys-or guys with knowledge of them, please come in!
- Any performance updates on the TCS or TCI 4400 convetrers?
- Racing in Arizona?
- 26"x11.5" ET Street vs 28"x12.5" ET Street
- Help me go faster......
- I have some BAD problems!!! HELP!!!!!!
- Gears and Tire
- Will the fans still blow with no A/C?
- First Bogart P2 series on an F-body
- Line Lock help?
- So what's the deal with the backspacing on the Convo Pros?
- Guys w/400+ ...what ET to expect with.....
- Time for larger tires...need some opinions
- Starting stock again! What to do first?
- 11.5975 @ 118.04 (1.5969)
- Anyone know the gains/loss's of true duals on MAC headers?
- Woohoooo. Hit 11's by a hair...
- weights in case your interested
- Woohoooo. Hit 11's by a hair...
- Another new best
- Anyone know how much Welds weigh with tires?
- Childrens Home Benefit Track Day at Steele Moved to Saturday Mar. 1
- Problem with 9" any insight?
- "Hardcore" racers- what is your suspension setup?
- What would a car reaistically weigh with these mods?
- Got a new best out of the vig 3200
- Wheel Size and Tire Size
- What pressure to run in nittos?
- Fastest SS-LS1? Power adder.
- Bieffe Integral GT helmet
- First Runs With The Gas -- Knocking on 9's
- Search does not seem to work---!front bumper....
- Paging Terry B.
- Drag rims....convo pros, draglites, or pro stars???
- Race Gas
- How much does your car weigh?
- Everybody's quite in Houston... What's up???
- What is a good run out of a stock full option 99 Z28 6 speed?
- Weight reduction of small steering wheel and no air bag?
- crossover / delay box