View Full Version : Drag Racing Tech
- 15x8 prostars BS ?
- Upper Panhard bar
- Anybody know the NHRA rules for cars running under 9.99?
- Can someone tell me what the coolant reservior..
- MATCO @ E-TOWN
- Terry Burger or anyone else...
- Absolute widest slick!
- '02 345hp air lid mod
- What is "good track prep"?
- Track footage (video)
- Racing at St Thomas this saturday
- Is anyone running the BMR K-member/A-arm setup?
- Weld skinnies on the front - anyone grind to make them work?
- Question about slick or drag radial sizes.
- Which DOT tire for max traction on a 15x7.5 Convo Pro?
- M6 guys with good 60' times inside for advice
- ? 03 Cobra times?
- What would be better?
- Track correction factors & density altitude...how to figure what you "could" run
- Nitto 315 on WS6 Question??
- New Best
- Will I run out of gear?
- Cheapest place to obtain M/T skinnies & wheels
- Skinnies with Nitto street slicks yes/no??
- 60' to 0-60 conversion
- Diagnosis on my car is complete
- Quickest ET with stock converter?
- Recommendation of Rear Sway Bar
- A4 Guys....Inside ---->>>
- I now have a motor!!!!
- Plastic under the front end/fender wells
- Paging 6.90 or faster NA folks (1/8th)
- anyone been 10's on DRs?
- skinnies up front/ remove power steering?
- New Best for Luckie Chuckie
- "Team NW F-Body" ROCKS Bremerton!
- Kinda Disappointed With My New Dyno Numbers
- 1.58 on nittos and NEW best on stock internals
- What should I run??
- Spent the day (!) dieting
- Tubes and tire growth
- Battery shut-off switch?????
- Pass side air bag throught the front anyone?
- Another new best. 11.08 @ 125.5
- Summit ET Points Leader....What a Night!
- Which ET streets would work better with 16x8 SS rims?
- Anybody got the 2 step up and running?
- Finally got my car weighed!
- Cecil Videos and 3 new bests
- Weight Reduction
- Me versus a 2002 Porsche 911 Turbo ???
- Which TQ arm?
- New Bests :) but broke :(
- New best even when spinning
- I think I have a Sponser for tires!!!
- New Best 1/8th & 1/4MPH
- Paging Tums!!!!
- Finally got some clean passes (hotcam)
- How much rotational weight are we saving by using welds as opposed to stock "guestima
- New Best
- WTF does this mean!!!
- may 19th, Silver Dollar Racway, GRUDGE WARS!
- ET Questions
- Anyone been to KILKARE in Xenia, Ohio?
- Why I love Hoosiers
- is my rear shot?
- Modern Musclecar Racers Association (MMRA) schedules 1st EVENT.
- I have ASP crank AND alternator pullies...what length short belt?
- Is it safe to drive on the highway at 65mph with tubeless DOT slicks???
- Results from Cecil Co. Dragway last night
- Luciiiii!!! Will you pleaze 'splain tis to me???
- ET Streets (pic) Please give pointers....
- Tire pressure for hoosier slicks?
- What kind of ET have you noticed from RR airbag?
- Video of me vs. GTS SS
- How High Is It Safe To Spin Motor??
- M6 guys... Options for scattershield/BH protection?
- My car will be running again soon!
- Is it just me or was there a thread out there about a lightweight hatch?
- Cartek looking to hit 10.6 with bolt ons
- Anybody Running Hal Shocks and or a Ram Clutch
- What free mods are left?
- PAGING JS >>>>>>>>>
- Setting Goals...then the road to accomplishing them????
- V6 springs?? Will they do what I want??
- Fun at MIR Saturday
- Do HAL SHOCKS work for Road Racing, or more just for Drag Racing?
- Can you run regular lugs with convo front wheels?
- Best way to launch...
- Hoosier slick 26x9x15 how do they perform?
- helpful things to bring to track.....
- Changes for next time at the track :)
- Best ET w/G5 AND Ported Heads vs Stck Heads
- Cam-Gears-RPM-Tire Height & Trap Speed
- Roll the lip for 28.0x10.0x15 Hoosier slicks?
- AGX tuning
- 11.45@116.94
- Anyone cam only into the 10's yet???
- Fun Ford Weekend in Baytown.......
- Getting project ghetto fab ready for action ;)
- I went from 13.3 to 17.5 ask me how!!
- Line lock probs w/ slicks
- Next mod -- lose weight
- First run with ET's and funky trans prob.
- Average 60' for a stock car?
- went to the track, lotsa ?'s ran 12.2 @ 111 NA
- The good the bad and the ugly (back from the track) :)
- Is there anything left in this car? 1st passes in the SS
- No 10s but new best anyway
- Jantzer Performance 10.89 @ 122 NA / Stock Shortblock!
- Thunder Shootout rule change for ProStock and Pro Outlaw...
- Finally broke through the 11-sec. barrier!
- summit part # for pro star 15x3.5 fronts?
- Just got back from the track!
- BOGGING How much better are 3.73's than 3.42
- LS1 in an X-treme?
- Maiden runs in the new combo tomorrow :)
- Screws and Slicks.
- 7.00 grrrrr
- First runs with Hooker LT's with OR pipe, Hammer Cam, and ASP pulley
- How to launch my nittos at the track, I am use to Bfg's?
- launch from second?
- 9 second ricer!!
- Launching with an aluminum flywheel and slicks on an M6....advice????
- Heater core removal for !weight
- ET. update
- Paging Joe Kizzire
- Where to get skinnies?
- Vid's from last weekend: romanss & wade from ARE
- Camaro 6cyl. rear springs
- I've gone maddddd!!!!!!
- Is this good for a 98? First time at 1/8 with Vig 3200
- Cayuga Update!! Track is NOT ready!!
- PLEASE help read my e.t's
- M6 Burnouts in the Bleach-box
- First time at the track with the new setup....look inside...
- New best on street tires before tranny let go.
- WELD 16X8 WHEELS
- Roll bar finally welded in.
- Quick question on Hoosier Wear Indicators
- BFG Drag Radials
- Memphis '02
- Those with Hals.. do they help handling when set higher (with stock springs)
- .3 gain?
- Test fitted the all new Hoosier 28x10x16 inch slicks
- Having trouble hooking up at HRP
- Poor Man's Supercharger???
- Fans on or off when racing?
- Paging project DRAGULA (PSJ)...Friday was good weather!
- New times w/converter/gear/tuning on stock A4
- New to the board!
- Shift light question
- pics of 10" pro star rears ON car/ stick out? get 8"?
- backspacing for pro star 8" rears?
- just tried et streets! TORQUE management!!!
- what rpm should i leave at with the SY3500
- Bolt on record a bit lower and faster: 11.273 at 120.02!
- 2 new p.b's in one day 10.89 n/a &9.94 n20
- TRACK TIMES ON NITTO'S
- some new times w/ cam and converter
- Gearing/Tire size question....
- Convo Pro rear rim size????
- Parts list to replace steering wheel?
- Awesome drag conditions again-will it hook though?
- 11.0......grrrrr!
- Ikeep hitting the rev limiter almost every other run,why???
- 12.37 @111.93 on bolt ons :) M6 stock internal
- Launching with Torque Converter?
- I'm almost quicker than a 421ci iron block motor!!!
- Stock radials in front-ET streets in back-is this OK?
- weld 15x10 pro star/ tire hit fender on hard acel?
- Naked Girls, NAKED GIRLS.............
- madmans lca's
- New best
- Paging Trevor D....
- 9s on the stock short block?
- pro star 3 1/2" skinnies ok daily driver?
- Line Lock Install - Brake Bleeding Question?
- New Slicks
- Shake down run at Cecil
- New additions to cage.
- From Nitto's to Mickey Thompson's Slicks
- Northwest Racers inside.
- Anyone Have Pics (or Advice) on Grinding FRONT Calipers?
- Mark (C5-PIG) runs 11.07@125.6 with our Stage 2-X H/C
- 500 miles enough for 1st 1/4 blasts?
- Cars with 15x10s, 6.5" backspacing
- Small update on the transformation of 1BADTA
- Whats the best way.....
- my quest for 10's n/a ..........continues
- Paging JS
- What backspacing do I need on a 15" weld wheel so they won't stick out of fender???
- New best!
- Grinded My Calipers - Need Some Help!
- anyone with Alston roll cage?
- Average LS1tech times
- A video a buddy of mine put together of my car at the track.
- Prostar 15 x 3 1/2 w/ kelly 165 /15 metric 600 weight
- Paging the lift off hood guys
- Anyone use the Performance Trends Drag Sim?
- Serious HP question---->
- What do you think I should shoot for ET/mph wise?
- How much does the Juk padding weigh?
- How much will lightweight carpet save me if I use my stock sound deadener?
- Question about FTRA.. Should I block the front intake? or is more better?turbulance?
- My LS1 Monte SS was knocking on 12's :>(
- Stuck in the 11.30s!
- Change some stuff on Dragula; need help on rear QA1/Hal
- Rear bar: wolfe, BMR, bigger stock style?
- Hotcam+TNT=11.68 @120.53
- Front runners w/ nittos in the rear?
- finally 12's
- Wheelie bars
- Tire and wheel combo?
- Maximus chipping away
- Finally weighed the car
- First time at the track with my Z........
- rear seat removers......need your help.
- Kickin my butt!
- Cash Awards from LG Motorsports for the G5 cam users
- Who tried a gutted intake manifold?
- POLL: Lexan/Plexi replacement glass for weight reduction
- Post your best 60' on radials
- what rpm should I launch at with a ST3500?
- HELP! 13.90 et with g tech LOOK!
- Paging Harlan
- Styrofoam in front end?
- ProStar vs. Draglite weight difference
- Has anyone proven the unsprung weight theory?
- Car runnig like shite!!!...
- Aluminum fasteners?
- How many cars in the 10's with stock rear and a M6
- subframe connectors/worth it????
- removed airbags! did I get it all to sell?
- Who makes light wieght, pin on hoods?
- How do I remove the airbags??
- Anyone figure out a Air Bag swtich?
- NFRA needs your help regarding turbo sizes
- What is "Driving Through the Converter"?
- removing bumper supports TONIGHT help! will it sag?
- Videos of mike's 10.84 and brent's 11.20 runs at ATCO.
- When does Moroso kick you off the track?
- New Wolfe cage pics?
- ST3800 vs. ST4000 vs. PT4400
- Anyone drive on REAL drag fronts????
- Going to bigger stall?
- how about these summit seats
- I need some lightweight seats..
- Best roll cage?
- Lose weight or gain power?