PDA

View Full Version : Drag Racing Tech

  1. Figured out what I am doing with the custom cage
  2. These two runs do not make sense time-wise..
  3. 1st anual MUSCLECAR POWERFEST cohosted by RPM
  4. My car goes crazy when I launch hard????
  5. First runs with my new 2002 Z28
  6. Those elusive 10's are mine !!
  7. Check out these Dyno Numbers!!
  8. How much MPH did you loose with your 12 bolt?
  9. New "Cam Only" record with Futral F4 cam-11.16!
  10. "Ghetto-Fabrication" a man, an idea, and his tools.
  11. What size tire for me, HELP
  12. OK what do you guys think?
  13. 3.42's w/A4
  14. World's fastest street Supra?
  15. Scratching away.....
  16. new best. slow but act interested.
  17. 11.51@115.6 N/A with Bolt Ons!!!
  18. Colonel ??
  19. IRS setups.
  20. NEW Yahoo Group
  21. New best times
  22. Which size ET streets?
  23. heads/cam guys please post...
  24. Made 33 Back-To-Back 1/4 Passess on sunday!!!
  25. Weight reduction plans Post cage install :)
  26. help! my mph sux
  27. englishtown round 1 top fuel the "BIG BOOM"
  28. How to launch m6
  29. Hal shocks worth it?
  30. What ET street for these wheels?
  31. Average 60' where you start pulling the wheels
  32. 1/8 mile times!
  33. LS1's RULE!!!New best yesterday!!!
  34. Pic from E-town NHRA Supernationals
  35. Help me get traction :)
  36. Got a launch pic!
  37. Explain DA, & optimum weather for drag racing?
  38. Weight reduction continues...
  39. Part # for 15x10 Weld Pro Stars
  40. NHRA Rules for 10's.....HELP!
  41. 1/8 mile times on the other car I'm involved with...
  42. 11's.... I can do that :)
  43. Need pictures of Alston or Wolfe 6 point roll cage!
  44. New 60' Time Thanks To Pro Stock John
  45. Need 2-4 tenths, suggestions please...
  46. Todays Matco Top Fuel, Pro Stock, etc.
  47. YOu think you have bad track prep?? Read this craziness........
  48. 6.0L home ported heads track results!
  49. New 6-speed N/A Record - 10.67 @ 128.36!
  50. Another new best at Super Chevy!
  51. NEW BEST...and a few ???'s
  52. What a fun day at the track! (Holy mph batman!)
  53. 8.30@85 mph w/ only lid and cutout??
  54. Paging Pro Stock John
  55. what should I run in the 1/4? big race tomorrow!
  56. relocating battery/ where to hook + wire under hood?
  57. Is my time good for the mods i have?
  58. BFG DR or ET Street?
  59. All ready for tomorrow and a little more weight out :)
  60. TH400 Tranny Shield?
  61. Hoosier 27X11.5X15 QTP------>
  62. 11.55@116 with H&C, is this low MPH?
  63. Welcome me to the 10 sec club..
  64. 15x7.5 Convos ?
  65. What 60ft Are possible
  66. 15x8 prostars BS ?
  67. Upper Panhard bar
  68. Anybody know the NHRA rules for cars running under 9.99?
  69. Can someone tell me what the coolant reservior..
  70. MATCO @ E-TOWN
  71. Terry Burger or anyone else...
  72. Absolute widest slick!
  73. '02 345hp air lid mod
  74. What is "good track prep"?
  75. Track footage (video)
  76. Racing at St Thomas this saturday
  77. Is anyone running the BMR K-member/A-arm setup?
  78. Weld skinnies on the front - anyone grind to make them work?
  79. Question about slick or drag radial sizes.
  80. Which DOT tire for max traction on a 15x7.5 Convo Pro?
  81. M6 guys with good 60' times inside for advice
  82. ? 03 Cobra times?
  83. What would be better?
  84. Track correction factors & density altitude...how to figure what you "could" run
  85. Nitto 315 on WS6 Question??
  86. New Best
  87. Will I run out of gear?
  88. Cheapest place to obtain M/T skinnies & wheels
  89. Skinnies with Nitto street slicks yes/no??
  90. 60' to 0-60 conversion
  91. Diagnosis on my car is complete
  92. Quickest ET with stock converter?
  93. Recommendation of Rear Sway Bar
  94. A4 Guys....Inside ---->>>
  95. I now have a motor!!!!
  96. Plastic under the front end/fender wells
  97. Paging 6.90 or faster NA folks (1/8th)
  98. anyone been 10's on DRs?
  99. skinnies up front/ remove power steering?
  100. New Best for Luckie Chuckie
  101. "Team NW F-Body" ROCKS Bremerton!
  102. Kinda Disappointed With My New Dyno Numbers
  103. 1.58 on nittos and NEW best on stock internals
  104. What should I run??
  105. Spent the day (!) dieting
  106. Tubes and tire growth
  107. Battery shut-off switch?????
  108. Pass side air bag throught the front anyone?
  109. Another new best. 11.08 @ 125.5
  110. Summit ET Points Leader....What a Night!
  111. Which ET streets would work better with 16x8 SS rims?
  112. Anybody got the 2 step up and running?
  113. Finally got my car weighed!
  114. Cecil Videos and 3 new bests
  115. Weight Reduction
  116. Me versus a 2002 Porsche 911 Turbo ???
  117. Which TQ arm?
  118. New Bests :) but broke :(
  119. New best even when spinning
  120. I think I have a Sponser for tires!!!
  121. New Best 1/8th & 1/4MPH
  122. Paging Tums!!!!
  123. Finally got some clean passes (hotcam)
  124. How much rotational weight are we saving by using welds as opposed to stock "guestima
  125. New Best
  126. WTF does this mean!!!
  127. may 19th, Silver Dollar Racway, GRUDGE WARS!
  128. ET Questions
  129. Anyone been to KILKARE in Xenia, Ohio?
  130. Why I love Hoosiers
  131. is my rear shot?
  132. Modern Musclecar Racers Association (MMRA) schedules 1st EVENT.
  133. I have ASP crank AND alternator pullies...what length short belt?
  134. Is it safe to drive on the highway at 65mph with tubeless DOT slicks???
  135. Results from Cecil Co. Dragway last night
  136. Luciiiii!!! Will you pleaze 'splain tis to me???
  137. ET Streets (pic) Please give pointers....
  138. Tire pressure for hoosier slicks?
  139. What kind of ET have you noticed from RR airbag?
  140. Video of me vs. GTS SS
  141. How High Is It Safe To Spin Motor??
  142. M6 guys... Options for scattershield/BH protection?
  143. My car will be running again soon!
  144. Is it just me or was there a thread out there about a lightweight hatch?
  145. Cartek looking to hit 10.6 with bolt ons
  146. Anybody Running Hal Shocks and or a Ram Clutch
  147. What free mods are left?
  148. PAGING JS >>>>>>>>>
  149. Setting Goals...then the road to accomplishing them????
  150. V6 springs?? Will they do what I want??
  151. Fun at MIR Saturday
  152. Do HAL SHOCKS work for Road Racing, or more just for Drag Racing?
  153. Can you run regular lugs with convo front wheels?
  154. Best way to launch...
  155. Hoosier slick 26x9x15 how do they perform?
  156. helpful things to bring to track.....
  157. Changes for next time at the track :)
  158. Best ET w/G5 AND Ported Heads vs Stck Heads
  159. Cam-Gears-RPM-Tire Height & Trap Speed
  160. Roll the lip for 28.0x10.0x15 Hoosier slicks?
  161. AGX tuning
  162. 11.45@116.94
  163. Anyone cam only into the 10's yet???
  164. Fun Ford Weekend in Baytown.......
  165. Getting project ghetto fab ready for action ;)
  166. I went from 13.3 to 17.5 ask me how!!
  167. Line lock probs w/ slicks
  168. Next mod -- lose weight
  169. First run with ET's and funky trans prob.
  170. Average 60' for a stock car?
  171. went to the track, lotsa ?'s ran 12.2 @ 111 NA
  172. The good the bad and the ugly (back from the track) :)
  173. Is there anything left in this car? 1st passes in the SS
  174. No 10s but new best anyway
  175. Jantzer Performance 10.89 @ 122 NA / Stock Shortblock!
  176. Thunder Shootout rule change for ProStock and Pro Outlaw...
  177. Finally broke through the 11-sec. barrier!
  178. summit part # for pro star 15x3.5 fronts?
  179. Just got back from the track!
  180. BOGGING How much better are 3.73's than 3.42
  181. LS1 in an X-treme?
  182. Maiden runs in the new combo tomorrow :)
  183. Screws and Slicks.
  184. 7.00 grrrrr
  185. First runs with Hooker LT's with OR pipe, Hammer Cam, and ASP pulley
  186. How to launch my nittos at the track, I am use to Bfg's?
  187. launch from second?
  188. 9 second ricer!!
  189. Launching with an aluminum flywheel and slicks on an M6....advice????
  190. Heater core removal for !weight
  191. ET. update
  192. Paging Joe Kizzire
  193. Where to get skinnies?
  194. Vid's from last weekend: romanss & wade from ARE
  195. Camaro 6cyl. rear springs
  196. I've gone maddddd!!!!!!
  197. Is this good for a 98? First time at 1/8 with Vig 3200
  198. Cayuga Update!! Track is NOT ready!!
  199. PLEASE help read my e.t's
  200. M6 Burnouts in the Bleach-box
  201. First time at the track with the new setup....look inside...
  202. New best on street tires before tranny let go.
  203. WELD 16X8 WHEELS
  204. Roll bar finally welded in.
  205. Quick question on Hoosier Wear Indicators
  206. BFG Drag Radials
  207. Memphis '02
  208. Those with Hals.. do they help handling when set higher (with stock springs)
  209. .3 gain?
  210. Test fitted the all new Hoosier 28x10x16 inch slicks
  211. Having trouble hooking up at HRP
  212. Poor Man's Supercharger???
  213. Fans on or off when racing?
  214. Paging project DRAGULA (PSJ)...Friday was good weather!
  215. New times w/converter/gear/tuning on stock A4
  216. New to the board!
  217. Shift light question
  218. pics of 10" pro star rears ON car/ stick out? get 8"?
  219. backspacing for pro star 8" rears?
  220. just tried et streets! TORQUE management!!!
  221. what rpm should i leave at with the SY3500
  222. Bolt on record a bit lower and faster: 11.273 at 120.02!
  223. 2 new p.b's in one day 10.89 n/a &9.94 n20
  224. TRACK TIMES ON NITTO'S
  225. some new times w/ cam and converter
  226. Gearing/Tire size question....
  227. Convo Pro rear rim size????
  228. Parts list to replace steering wheel?
  229. Awesome drag conditions again-will it hook though?
  230. 11.0......grrrrr!
  231. Ikeep hitting the rev limiter almost every other run,why???
  232. 12.37 @111.93 on bolt ons :) M6 stock internal
  233. Launching with Torque Converter?
  234. I'm almost quicker than a 421ci iron block motor!!!
  235. Stock radials in front-ET streets in back-is this OK?
  236. weld 15x10 pro star/ tire hit fender on hard acel?
  237. Naked Girls, NAKED GIRLS.............
  238. madmans lca's
  239. New best
  240. Paging Trevor D....
  241. 9s on the stock short block?
  242. pro star 3 1/2" skinnies ok daily driver?
  243. Line Lock Install - Brake Bleeding Question?
  244. New Slicks
  245. Shake down run at Cecil
  246. New additions to cage.
  247. From Nitto's to Mickey Thompson's Slicks
  248. Northwest Racers inside.
  249. question for fast M6's...
  250. Anyone Have Pics (or Advice) on Grinding FRONT Calipers?