View Full Version : Forced Induction
- FMIC vs Vortech Aftercooler? Help please
- Supercharger Q
- Vortech vs. Procharger....
- WTF.. Who shrunk my Summit???
- HUGE Thanks to Mike Brown and some dyno numbers!
- people with alky kits, have question.
- thoughts on this cam for a TT 427 sbc please
- Phamspeed Turbo install part TWO,
- WILL A 2.08/1.88 Stage III head work good?
- Parts for sale some of you guys may be interested.
- I know this has been beaten to death, but turbo cam help please.
- Turbo Shops where?????????
- What is your Static Compression and Boost PSI
- Boost referenced regulator users
- Maggie Cam Question
- turbo kit keeping a/c...who is the best?
- Turbo or Supercharger
- MAF maxed @ 8psi
- differnt makes
- Top numbers for STS base turbo?
- tuning for 2 boost levels??
- Thinking of taking the plunge...
- BOV vs Bypass Valve
- Changes to Phamspeed Budget kits!!
- New owner of Phamspeed and a bunch of changes
- Custom/Different TT Idea
- which event would you guys go to
- Pics
- boost q
- Turbo Pro Mod
- Phamspeed! need info on twin kit!
- How the hell do you get a ATI dampner off?
- Ordered The Maggie.. Question on Cam
- Where do you guys buy your head gaskets?
- Twin F-body guys
- Fi 408...
- thinking about boosting my TA this summer...
- Alcohol injection question
- TEA Stage 2 Heads for my setup?
- Detonation got some ringlands
- Hours to install Phamspeed budget kit?
- Building my first boosted engine.
- How much gain by switching to LS6 intake
- magnacharger ?
- Reverse Truck Manifold Turbo Setups
- Electronic boost controller and TPS
- Maggie or Procharger?
- Paging NICK @ Newtech
- Can a CAM lift heads
- Finished twins pics
- anyone know what kind of timing chain setup harlan ran?
- STS tunes please?? using HPTuner
- mild or stainless header flange
- How do you adjust a bypass valve?
- How much can I drop compression by changing head gaskets??
- GM verse Ford Late Model Shootout
- what are the differences of 98-02 exhaust manifolds?
- Dyno'd STS or... - Who's got BSFC numbers? - Anyone?
- How I modified the oil return line on the STS to go back to the oil pan
- How I tweaked my STS pipe for more clearance at the rear lca (pics too)
- Head Gaskets
- 10 bolt takes more beating before retirement!New best!
- Twin Maf?
- got alky results
- dual-intercooled P1SC install pics...
- Blow off valve busted????
- butt dyno and ls2 intake
- STS turbo'd 382 ci SS camaro dyno Video!
- Stainless Works Install Day... I lost count
- AFR's on boost
- Which Turbo Kit for 15-20 lbs on a Forged 347?
- Can I run a .070" headgasket for turbo motor?
- Boost change with stroker?
- Value of the ATI ProFlo Bypass?
- Livernois Motorsports Escalade / Detroit Speedworks Turbo Kit goes 12.88@107!
- Turbo Gurus, oil drain question...
- What cam?
- Inputs on turbo size & the Master Power linup?
- what all will i need to change a p1sc ati blower form an lt1 to an ls1?
- Morgan Motorsports Pulley ?
- Turbo
- is it safe??
- My TT's first shakedown passes: 9.09@146, 9.17@152
- ATI Balancer for blower??
- FI people who are running the GMPP single plane intake....
- Harlan 2 step instructions
- Pro Turbo Systems Summer Sale!
- Just ordered my Phamspeed Kit.
- Griffin FMIC (New) for 98-02 Camaro
- d-1sc
- Is a turbo what i need??
- FI guys,ever have intermittent maf spikes throw fuel/timign around?
- ATI P1SC/42# Bosch install tomorrow...
- Update on Hptuners 2 BAR tune drivability
- Need turbo oiling help QUICK!!
- Got my TURBO on my Yukon Denali - Great Job Livernois Motorsports !!!
- Phamspeed budget turbo
- low maf freg?
- Ice in water resevoir
- Parasitic Power loss with SC..what is it???
- Back on the road!
- Crankcase Pressure and valve nubs...
- is 100 low lead oct ok to use on turbo setups?
- Mufflex GP... 1 more order needed!
- Oiling for a PTK kit
- took the phamspeed plunge :)
- where to get a Turbo header??
- question about the tt kit from Phamspeed
- Bottom end LS-1.....what can it take?
- How fast are you FI induction guys??
- stupid question about slicks on Turbo'd F Bodys?
- My install ...finished
- Tapping into boost/vac line... Setup done but have ?'s
- Procharger and cali smog ques
- What internals to replace with turbo?
- Bov
- Where to get Part#'s for Procharger Parts?
- air lid on d-1sc
- PHAMSPEED Maf Sensor Location
- This little 306ci Ford setup ROCKS!!!
- if i built my own turbo kit would it pass smog?
- smog legal turbo kits?
- Rebuilt motor and more mods = 100rwtq and 50 rwhp LOSS
- How important are heads with high power FI setups?
- Single Turbo LS1 C5?
- where can i get stainless collector flanges?
- Phamspeed Turbo Pipes
- How can you check a Tial BOV off the car?
- Need Help/Advice on a 97 LT1 M6 FI Car (Long Read)
- NON-projected Tip Spark Plugs? Anyone use them?
- How important is Quench and intake runner volume
- OBX with dent FS
- max safe TQ on a 427 TT
- Whos making the most power with STS turbo?
- Hp 2 Bar Or Ls1edit?
- Looking for Turbo kits and installation in Texas?
- Dose anyone have sounds of the ATI race ready valve?
- questions for phamspeed
- Any reason to go with a TTi kit? over phamspeed?
- What kind of BSFC #'s do you FI guys see?
- Question
- New BOV installed with ATI...
- Safe Boost
- ProchargedWS6 FOR SALE!
- tti turbo sizing
- Radix on ZL402? What do you think?
- New STS Dealer in So.Cal.!!
- Oil pressure help!
- ATT George at Turbotech! INSIDE!
- Forced Induction Extravaganza!
- 10 bolt survives a few more passes, still alive!
- Rear end recommendations...
- ATI W Cam Videos
- Ati 8rib?
- Anyone with a running Phamspeed kit, please come in
- p1sc-1 cam suggestions
- 1.5 years, $15,000., Countless Hours, 1st and only 12.0 sec Pass> Boom POP Spit Broke
- STS concern...
- water cool intercooler?
- Redline Motorsports
- Will 8.1 injectors work for only 6-8 lbs. on a 5.3?
- Can you special order an extra whiney Procharger?
- Timing for 8lbs off Boost with 8.5to1 comp?? & who to tune in Now Orleans Area?
- Few more D1SC/SDCE/FMIC progress pics
- Procharger video?
- If anyone's interested, SDCE 8rib tensioner GP
- Phamspeed GT42 Kit PROBLEM(S)..JOHN@PHAMSPEED HELP
- Is it possible to upgrade from a p-1 to a d-1?
- Post Your Turbo Set Up Pics
- 700rwhp...full drag car..loud!!!
- Dropped Valve on 6.0 Radix
- Which gaskets to use???
- stock internals and s/c
- Tell me about your turbo setup
- where to get aluminum 4" elbows
- ATI twins to FMIC: parts needed?
- Piggyback computer
- Help with High Boost? Only getting an extra pound?
- What for rest of setup?
- Phamspeed questions
- Safe Lt1 Boost
- Question for Mightymouse
- basic forced induction tech questions
- my turbo cam experience
- Head Question
- Which kit should i get
- What about a Stealth II cam for FI
- Porsche KKK K26 Compressor Map?
- Anyone have a set of 6.0 MLS gaskets?
- Price of TTi kit.
- Can a stock tranny and rear hold up to the STS turbo
- have a problem under boost?
- This Turbo Okay?
- What turbo system to help me get 700rwhp and put me in the 9's?
- PT67? psi stock sb
- RPM's Drop and car stalls
- ASP, stock, or 3.60" pulley on Procharger ?
- Lowest maintenance block?
- "Sound" advice
- FMIC kit with Griffin?
- Supercharger
- Got into a debate with a Ford guy today about high compression and boost..
- which one to choose??
- Do stalls and turbos mix?
- o2 placement on turbo system
- max boost, power with sts t60-1
- Turbo headers
- Procharger Experts help! Belt problems.
- And you thought the GT42 looks big, hehehe
- So What Turbos For Twins, 600 RWHP
- Intercooler placement. opnions!!!
- Your thoughts on Precision Turbos.
- Stock oil pump on 02 LS1 turbo?
- Min/Max angle for turbo oil drain?
- How hard to install myself?
- MAF.... blow through or pull from??
- Tt Sbc 327
- Mount BOV after/before intercooler?
- Sweet turbo Kit on a LS1 Sand Rail:
- EBAY turbos....Guys please read
- dyno with new cam
- 99 Trans AM WS6 with Incon TT kit for Sale
- Non f-body turbo question
- Max HP&TQ w/ stock pcm & forged 346alum block?
- asking about a cam?
- TT installer
- Modifying intercooler questions...
- X trim ?'s
- CAS intercooler installers I need Help.
- california leagal fi system?
- turbo headers ???
- Turbo Intall -- more updates
- Turbo
- So, which FI cars will be at the Commerce Race in three weeks?
- belt size
- 6.0L Truck Heads on stock motor Q's
- Compression of pistons, and rods.
- Crank Case Pressure, Catch Cans and Breathers
- Procharger D1SC or P1SC?
- can someone please help my NA/FI problems?
- Boost And Fuel Lines
- W2W 408 Dynoed today.....
- Piston Oil Squirters
- Help, need advice on gauges and pod
- M10 and M24 TT
- Should I Powder Coat or No??
- Blowby & Oil out Breathers...
- 6psi to 8psi how much more power
- Ebay Turbo Kits
- Anyone got a 2.25" coupler there not usin?