View Full Version : Forced Induction
- Link to pics of my alky install
- vortech kit for sale
- Done with the blower for a while..
- Blower and Spray
- different kind of belt question
- Turbo Tune?
- F-Body Turbo Headers
- For those that have e-mailed for turbo comparison GT45 vs 76GTS...inside
- STS people, and your oiling system...
- 700rwhp and the stock ECU?
- turbo size question
- Paging Dana Holden????
- I Need Help!!!
- Magnuson's C5 Intercooled system has a CARB number!
- What HP level is the stock crank good for on boost?
- Going back to Non intercooled
- Pricing estimate for my goals...
- SDCE Tensioner Tension??
- AT1 Question!
- Questions about a Procharger on a C5
- Downpipe Pic... this wont bleed boost!?
- Looking into doing a twin turbo kit...
- 675rwhp/682rwtq 11psi/93 pump gas
- Need pics of your Turbo Oiling system...
- Supercharger leaking oil!! Help
- Broke tranny on first night out
- Fuel / Boost Question...
- Paging Harlan!!!!!!!!!
- vibration from cog drive?
- 1st time @ track with new set up
- P1SC1 to D1SC dyno results
- ATI's supercharger PS1C kit and cam/valvetrain mod
- Need help! Building up a FI motor
- Maxxed out my MAF! What are my options?
- Magnacharger fits F-Body!!
- amacgt's 10psi STS dynograph w/in
- Dayco Polycog belts, any good for a s/c belt???
- ATI bracket assembly & Pulleys
- Need inventory list and instrustions for ATI kit for LT1 w/ single intercooler.
- Spal Fan with ATI High Temps
- Steve's and Mike's Turbo Formula
- Just Installed Ati procharger!!!
- Info Request 427 Blown Applications
- parts galore
- Boost and cam needed for 600rwhp with a 408 stroker?
- How me your APillar Gauge pics
- Removing MAF since I went FAST standalone, how long is a stock MAF
- Any STS CARS have any dynos or track times?
- The car is finally running like it looks, dyno results...
- Shakedown continues at the dyno
- custom 2.9" Powerdyne pulley for sale
- My incon on the road soon
- Where to get Chain drive when i upgrade to F1R
- Turbo and supercharged
- Big turbo, do I really need it?
- T04E big enough for stock?
- FI Built Motor
- what guages do I need?
- Procharger Installation
- I have v9-g-trim vortec kit 6pd need advise on moving up
- MMS pulley and 4.0 and 3.85" blower pulleys for sale
- Question about FI power...
- A&A ati superchatrdd
- Griffin Front Mount Intercooler ordered
- Help with boost gauge
- anyone using the RC 75lb injectors?
- Who all likes there STS kits
- How Much Timing - Incon on 8.9:1 370ci
- Tapping the Oil Pan
- Oil Catch Can
- Where? Best online price for ProCharger?
- 2 years in the making, finally today is the day!
- Finally made some passes at N vs S
- I Was Wrong....
- where to buy t-70
- Attn: e-Boost users.. I have questions
- rebuild incon turbos?
- New best at NvsS yesterday
- Which Fuel Pressure Regulator?
- P1SC sound like grinding?
- ati pulley ?
- ati d-1sc + water injection
- anyone selling a 4.0" 6 rib Procharger pulley?
- oil still spraying!!!
- what ignition system mod's for very high hp?
- Ati tensioner pulley rattling?
- missing up top when i add in nitrous
- Procharger Dyno with 50 shot
- Custom turbo setup questions
- Reply To Rob Raymer Re: ARE 404...
- TurboTech Kit Overheating?
- Cog update, for those who care!
- Couple parts came in today....
- Supercharged solid roller 422?
- Did anyone ever try building their own SC setup ?
- Want to shoot some N20
- Powerdyne Pics.
- Who's running a vortech ys or ysi?
- What cam for use with twin GT30 turbos??
- Procharger anti-serge valve?
- its all coming together
- Standard temperatures?
- BOS...no luck on the 3.2...
- Speed Inc T88?
- Heads/Cam Procharger
- what muffler is best for a blown car?
- Head Gasket?
- ATI and Belts
- Installing P1SC, no FMU?
- Very Interesting Air to Water Intercooler
- turbo Idea!!
- ATI newbie needs some help/guidance ...
- Stainless Works single turbo kit
- LSX intake on FI motors?
- ATI polished plenum, twin intercoolers & piping???
- Eight Turbo LS1!
- CAT Question???
- Sts.....
- 3.4 pulley w/ SDCE 8 rib set up...
- ATI GUYS NEED A FILTER? try this......
- Going to go with an STS turbo setup, I need a little advice
- yet another question about cams
- ati superdampener, question
- QMP turbo kit?
- what is the different between p-1sc and d-1sc ?
- For those looking for help selecting turbos
- "Top Gun" 374ci TT C5R engine sale
- Could this be the problem?
- Air filter robs 86rwhp?
- D1SC/FMIC/7" crank/4.1" blower pulley boost numbers.
- turbo guys -- what cams are you running?
- Still moving forward with Project Dragula
- Anyone Want My Magnacharger, 21cmc Blower Cam, Kb Boost-a-pump, Gauges, Pillar Post,
- Water/Alchy installed
- intercooling ??
- SMC alky kit for sale
- Ding Dong the Blowers Gone.....
- Powerdyne Superchargers?
- FS: MMS Pulley
- Anyone have a 6 rib 4.10" ATI pulley to sell?
- 383 aluminum or 402 iron block, better daily driver?
- Who used Alk/Water injection?
- Pics of installed Superchargers
- Stock sized forged Pistons? (yes i searched)
- Got a few last vortech questions.
- Fixed all boost leaks and Bov and still bad problems!
- Turbo timers
- spark plugs 4 S/C
- Spraying freeon on intercooler?
- 92 degrees out and still ran in the 6's in the 1/8
- Broke a piston today, what might have caused it?
- wrapping Turbos bad or good
- SDCE stuff installed :)
- dyno'd only 379 RWHP WTF!!!!!!!!!
- to O-ring or not?
- Where to buy a FI kit without the head unit?
- LS1 Bird's SOM '01 Formula (ATI Procharger)
- STS on a 5.3L sound/video clip
- Issues
- I ripped the motor out and apart, Guees what!!
- tip for new incon users
- Vortech non intercooled: still happy?
- Twin Turbo Super Sport Z-28
- i need help on turbo .
- Found some boost leaks.
- thinking about a turbo. need some info
- Power Request from Posters
- Procharger Dyno
- Anybody seen this 8 Turbo Setup LS1?
- How dependable?
- Need Your Input on my Boost Fluctuations
- vortech bypass valve options.
- oil from breather hose on d1-sc???
- p-isc.. new fuel pump??
- You FI guys need to see this
- 2 Weeks Left on Street Pro Electric Cutout Sale
- Who has done over 700rwhp? 800rwhp?
- chrged guys
- Supercharger for the LS1
- can i get some help reading these plugs
- What do you guys think about this turbo kit for under $4000?
- Do any of you guys have ls1s w/ reversed intake manifolds?
- Filter sock...
- As you all know the WS6 is SOLD
- Granatelli MAF
- Just got Vortech
- SDCE stuff arrived
- Where to get D1SC?
- pulley tensioner 4 supercharger
- Price BreakDown ATI Kit
- Base Fuel Pressure change and A/F relation
- SC choices?
- Some pics of my TT LT1 SS
- Woohooooo...
- ati bypass valve ?
- Using Iridium plugs on a FI motor?
- Hey guys, help me with my fuel pressure please
- Powerdyne SC
- Tl Bov
- ATTN: SDCE LS1 tensioner guys...info from Scott
- powerdyne SC installing manual??
- What FI guys are going to the north & south shoot out next week?
- Need professional's opinions.
- 13 lbs of boost is missing is part of the problem!
- is this spark blowout?
- Who's turbo kit is Lingenfelter using?
- Alky injection through MAF?
- When installing an intercooler setup...??
- Crank Pulley Needed
- STS dyno #s on my truck.
- Boost, KR and Torco results....
- ATI superdampener, help needed, bolt size
- Need help Reading Vac/Boost Gauge
- Does your car run hot?
- hooking up boost gauge and boost controller
- My project .
- WTF is up with magnacharger-they have kits for the GTO and SSR
- what pistons and rods for turbo?
- Bad Ass Supra!
- intercooler pipe ?
- Turbo info
- IAT temps...
- You thought your turbo setup was badass!!?!?
- crank pulley???
- Vortech crank pulley q
- New to FI
- SDCE Spring Tensioner Update
- Need to check engine timing... help?
- good blower Cam?
- Selling My heads!
- I have to say Good Bye!!!
- Info
- Opinions on my new setup....
- ATI P1SC-1: Multi misfire code
- MMS Pulley, Belt Snapped
- What motor oil for turbo car?
- T-bar style clamps??
- have you guys seen this.
- I have a question about calculating compression ratios under forced induction.
- Didnt get my 1.4x 60' with the nitrous :(
- Major Problems with car!
- frcefed98 any updates
- another day another dyno
- TT-99C5 car cutting out @ 4,500 RPM
- symptoms of lifting head?
- What Emission cam for D1-SC
- FI Heads from Absolute
- ATI Pulley Conversion to MMS Pulley
- Issues to resolve before play-time!
- vortech owners ahve ???'s